Question about 2006 Toyota Land Cruiser

Open Question

How do I get into the inline fuse clasp for the landcruiser horn

Posted by on

  • lululala Sep 06, 2009

    so if I do decide to click 2 of the adds. when and where do I get the answer

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery his good..jump the battery for 1 second. Car starts drive 2 block car will not start sometime it would start for about 2 weeks then just like that it will not start. Tried everything


When I had a similar problem, the culprit turned out to be a loose battery cable. Is the negative cable tightly secured to the battery post, with nothing between the metal clasp and the lead terminal?

Feb 07, 2017 | Cars & Trucks

1 Answer

Why does my 20 amp fuse blow when the engine is running, but work without issue when the engine is off?


Why fuses blow or how to find short circuits or drains !

fixkick.com/power-elect/blows-fuse.html
(the Park (tail-running) lamps go to up to 20+ places) ... The below covers shorts in the cab box, not the 50-100 amp engine bay fuse box that loves to rust out.

Nov 02, 2015 | 2013 RAM - 1500

1 Answer

What would cause the horn chirp to on it's own?


check for open wire connected to the horn, also look for a break in the inline fusable link, try to find the fuse and see if it is weak or damaged

Aug 22, 2014 | 2000 Nissan Xterra

1 Answer

How to rig a horn on chev cav air bags have been deployed ?


Simply run a wire form the + side of your battery to your push button. Make sure you put a 20 amp inline fuse in it. Then run a wire from the other side of the push button to the horns.

Jul 24, 2014 | Chevrolet Cavalier Cars & Trucks

1 Answer

Installing a temporary horn button


IF this is really just temporary, locate the wire going to the horn(s)
Find where you`re going to get the +12V feed, direct from the battery, cigarette lighter, spare hot terminal at fuseblock. any place that`s hot with the key switch off.
Connect one wire of the inline fuse holder to the +12V source you have selected.
If you don`t know for sure that the horn(s) are OK run a wire from the other side of the fuse holder to the horn feed, and connect temporarily, it should honk.
If all is well there run that fused wire to one side of your switch and the other side to the horns.
That`s it.

Dec 04, 2013 | Cars & Trucks

1 Answer

My 2006 Honda civic has a underhood fuse box problem due to which horn of my car is continously blowing. Mechanic is suggesting to bypass the fusebox for horn and use horn directly with a relay as the...


The mechanic is right. The relay is needed to prevent voltage problems, but remind him that you want a fuse inline since one way or another, the original was fused.
Also ask him about what happens with the antitheft alarm. It is suppose to blow the horn with lights flashing. You probably will lose the horn for that task.
Since this is a Hybrid, it will be very difficult to obtain a used or Salvaged fusebox for your car from a Salvage yard. Otherwise using a used part would save you alot if you want the fusebox replaced.

Apr 13, 2012 | 2006 Honda Civic Hybrid

1 Answer

Where do i finde the horn fuse?i found the fuses ,but none are labled horn?


Look for the horn relay under the hood, there should be either a fusible link feeding it or a fused wire. There may be an inline fuse, and it may feed from a fusebox under the hood.

lp

Dec 29, 2010 | 1996 Isuzu Hombre

1 Answer

I have a 1985 corvette that the horn has no power to it. Where can I find the wiring information for it to see where the problem may be?


There is an inline fuse,and relay for the horn behind the center instrument panel.If the fuse is good then follow the dark green wire from the relay to the horns.You can ohm the wire to see if there is an open circuit from the relay to the horns.Hope this helps.Good luck.

Apr 08, 2010 | 1981 Chevrolet Corvette

1 Answer

Toyota Landcruiser. How do I get into the Inline


Normally an inline fuse it opened by pushing in while twisting counterclockwise. It will turn slightly and then you can open it up.

Sep 05, 2009 | 2006 Toyota Land Cruiser

Not finding what you are looking for?
2006 Toyota Land Cruiser Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...