Question about 2002 Volkswagen Jetta TDI

Open Question

My daytime and headlights do not work but my high beams do, all fuses are working

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 491 Answers

SOURCE: headlights work on high beam but not on low beam is there a fuse

on these cars if 1 of the bulbs blow out then you will have to replace them both because they wont work. replace both headlight bulbs and they will be just fine

Posted on Dec 29, 2008

  • 260 Answers

SOURCE: Low Beam

Make sure you have a good switch
bulbs good
relay and or fuse is good

Posted on Apr 11, 2009

  • 109 Answers

SOURCE: headlights no longer work on low beam

This is a bad switch in the column. remove the steering wheel and fit a new switch. Hope this helps...;-)

Posted on Apr 14, 2009

  • 398 Answers

SOURCE: low beam headlights switch does not work

Bad head light switch

Posted on Dec 05, 2009

  • 1 Answer

SOURCE: 1996 vw jetta problem with the headlights. The

I don't have a wiring diagram ,but on most cars I would say your low beam bulb is bad. Try swapping sides to see if the problem goes with it, or just replace the bulb. You can always keep the new one until needed someday... shadetree mech by necessity.

Posted on Jan 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low beams not working but high beams are on a 2000 chevy metro


The headlight relay provides power to the dimmer relay, then power goes thru a fuse for each light for each circuit (4). The low beam fuses are in fuse block 2. The dimmer relay is controlled by the daytime running light module. The headlight and dimmer switches send signals to the DRL module. You may need a shop manual to troubleshoot the circuits.

Jan 24, 2014 | 2000 Chevrolet Metro

2 Answers

Daytime running lights not working


Assuming this is an LX, check 7.5A fuses 9 and 5 in the driver's underdash fuse/relay box. Fuse 9 applies power to the DRL indicator light in the gauge assembly which connects to the DRL control unit. Fuse 5 supplies power to the DRL control unit when the ignition is on. Also check 100A fuse 41 in the underhood fuse/relay box which supplies power to the headlight relays. Setting the headlight switch to HEAD causes the headlight relays to close and apply power through 20A fuses 45 and 43 in the underhood fuse/relay box to the low beams. Low beam power also passes through the DRL diode to close the high beam cut relay and prevent high beam use during DRL operation.

Sep 23, 2012 | 2002 Honda Accord

1 Answer

Both low bean headlights do not turn on high beams


Replace Relay #46 in the underhood fuse panel.

Aug 25, 2010 | 2003 GMC Envoy

1 Answer

2002 pathfinder, the left headlight bulb does not work when the


Sounds like you need a bulb,the daytime running lights send power to the high beam wire so they look like low beam lights are on but really they are high beam lights running on low voltage.

Nov 19, 2009 | 2002 Nissan Pathfinder

2 Answers

My r/f high beam is out, so I replaced the bulb but I still have no high beam. Also my daytime running lights stopped working, could they possibly be related?


Yes your daytime running light just uses the headlight bulb on a lower voltage so if the headlight is not working the drl will not work as well, they are dirrectly related,,check the head light fuse,and check to make sure the bulb is good,,

Oct 06, 2009 | 2000 Saturn SL

2 Answers

Drl and high beams dont work


Check the bulbs -- the daytime running lamps use the highbeams on the resistor -- There are two filliments per bulb one high; one low. If both high beam filliments are out nothing will work....replace bulbs if this is the case.

Aug 02, 2009 | 1999 Pontiac Sunfire

1 Answer

Low beam headlight /daytime light are not working


It's on the driver's side. Remove all the plastic & it's in there.Big rectangle, black box,about 1.5" thick,lotta wires.

Jun 22, 2009 | 1996 Chevrolet Tahoe

1 Answer

Headlights alternate on and off left and right daytime/high beam


although the underhood relay panel is common, I'd check your headlamp bulbs first, these are cheaper than the fuse box. The daytime running lights work off the high beam circuit, thus, a blown highbeam bulb could be the culprit, the fusebox solution was more common on 2001 and up modles, although it's a definite possibility.

Feb 18, 2009 | 2000 Dodge Caravan

1 Answer

Headlights wont work


Well...lets start with the obvious. Check fuses and NEVER piggyback any stereo or security stuff into their fuses...you dont want the lights to shut down during a night drive!!
Check under the hood for a relay center...also has some fuses there as well.

The Daytime Running Lamps are a "straight through wiring configuration". Doubt it even goes through a headlight switch at all.
But the regular lights do.
Unless you've worked on the front of the car and forgot to plug the headlights back in, do this...
Turn the light switch on...looking at the instrument cluster , can you make the high-beam-indicator light come on?
As you rotate the headlight switch knob...does the instrument panel lights brighten or dim? You probably have a faulty headlight switch...auto stores have them...they simply plug in.

Dec 31, 2008 | 1997 Chevrolet Cavalier

4 Answers

Low beam headlights do not work, but high beam headlights do


Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.

Jul 16, 2008 | 1991 Nissan Pickup

Not finding what you are looking for?
2002 Volkswagen Jetta TDI Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...