Question about 1999 Ford Explorer

Open Question

Transmission i when to adavnce auto part becaues my check engine light came on they told me some wrong with my transmission on a dodge ram 2000 and the code p0174 what do's it mean and do's it cost alot to fix

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 dodge intrepid stalls out while driving and sitting in red light why


Dodge 2000 Intrepid stalling on Traffic Light - This is caused by either wrong amount of Fuel or Air mixing in Idle condition. Please check fuel pressure at Idle which should be at least 38 psi and should go up when you press the accelerator. If fuel pressure is okay then Clean out the Throttle body carefully. This should solve the problem if no Check engine light is on. If Check engine light is on then please confirm and give me the codes present in On Board Diagnostic port (Auto Zone or Advance Auto will read the codes free for you) and we will go from there.

Jan 05, 2015 | 2000 Dodge Intrepid

2 Answers

Check engine light is on in Dodge Ram 1500 why?


Drop in to a parts store like Autozone and they will scan it for you free and point you in the direction of any possible problem. If not, get back to us with that code(s) and we can help.

Aug 15, 2014 | 2000 Dodge Ram 1500 Truck

1 Answer

I have a 2000 dodge durango with auto trans and 5.9 l engine. A trouble code of P0720 speed sensor malfunction came up but I do not experence any of the problems described in the posts. My speedomoter...


code p 0720 refers to output shaft (OSS) sensor--circuit malfunction=== causes--wiring-- OSS sensor--ECM/TCM
check wiring and connections to the transmission for corrosion /water etc
have the OSS sensor tested by an accredited auto transmission shop--replace if faulty
if ok have the TCM ( transmission control module )tested

Jul 08, 2017 | 2000 Dodge Durango

1 Answer

2000 dodge ram check engine light came on. code p 0720 is


P0720 is a code for the output shaft speed sensor on the transmission. If you are handy with a volt/ohm meter you can test the resistance of the sensor unpluged. should be 500-700 ohms. or you can just put a new sensor in, its a comon problem.

Jul 08, 2010 | 2001 Dodge Ram 2500 Truck

2 Answers

2006 dodge 1500 check engine light came on how can I check what it is?


Auto Zone has a scanner which they will check your truck FREE of charge. just simply ask and they will check the codes for you

Apr 13, 2010 | 2007 Dodge Ram Truck

2 Answers

My 2000 DODGE RAM 4X4 1500 IS SHOWING BRAKE , ENGINE, TRACTION WARNING LIGHTS .THE SPEEDOMETER ALSO DOESNT WORK.AUTO ZONES SCAN TOOL SAID IT WAS THE TRANSMISSION SPEED SENSOR.I REPLACED IT AND THE ENGINE...


Had this exact problem in my shop yesterday. Turned out the connector on the speed sensor on the rear differential was broken allowing it to pull out of the sensor. Cleaned out inside the connectors and tied them together with a pull tie. Problem solved.

Oct 29, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Erroe codes on Dodge Ram 3500 Diesel, dually


The 1682 code is - Charging System Voltage Too Low

The 1693 code is - DTC Detected In ECM Or PCM

The 0523 code is - Engine Oil Pressure Sensor/Switch High Voltage

Jun 11, 2009 | 2000 Dodge Ram 3500

Not finding what you are looking for?
1999 Ford Explorer Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...