Question about 2006 Jeep Liberty

Open Question

How do I reset the ptm in a 2006 jeep libety - 2006 Jeep Liberty

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does a jeep libety turnup cost $500.00+ .Do the coils have to be replaced along with the sparkplugs.Or why do so many things have to be replaced ? Isit because of the 100,000 + miles on it?

It really depends on where you take and the costs of the parts. Some shops around here charge 200 dollars an hour.(they aren't that good) I have purchased some plug wire sets for 140 dollars my cost. Most garages will add money to the parts. If it costs them a 100 dollars it costs you 150 dollars. Tune ups are not that difficult , you can do it yourself. Buy a manual-25.00, buy the tools to do it-100.00, plugs 6.00 a piece=50.00 for 8, air filter,(which they don't replace) 25.00, fuel filter (which they don't replace0 15.00. There 215.00. You save the rest and will only take a few hours at most.

Sep 05, 2011 | Jeep Liberty Cars & Trucks

1 Answer

I took my 2007 Jeep Libety to Advanced Auto to see why my engine light stays on. They gave me a code of PO113. Could you tell me what that is and what I need to do to resolve this issue. Could you also...

P0113 Intake air temp sensor..... maybe its unhooked? You mean Traction Light? what other lights? It doesnt do any good to tell that lights are on without a description.

Sep 01, 2010 | 2005 Jeep Liberty

1 Answer

2006 jeep cherokee cant reset computor showing low tyre presure tyres all good

The TPSM (Tire Pressure Sensor Monitor) just is "reset" with special tool in your delaer, the ECU/PCM reset dont affect this signal from TPSM.

Hope help with this, good luck (remember comment and rated this).

Jul 23, 2010 | 2006 Jeep Grand Cherokee

1 Answer

2003 Jeep Libety not getting enough heat

you will need to flush the heater radiator ,by disconnecting the feed pipes and flushing the rad with the hose or a small pressure washer

Jan 30, 2010 | 2003 Jeep Liberty

1 Answer

How to reset the engine light code on 2006 Jeep Grand Cherokee?

Needs to be done with a scaner . Autozone has this and they can reset it for free.

Dec 26, 2009 | 2006 Jeep Grand Cherokee

1 Answer

How do you reset the perform service message after changing the oil in a 2006 Jeep Grand Cherokee?

That should allow you to download a copy of the owner's manual that will detail the reset procedure.

Basically, on Jeep products you

To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure:
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal slowly three
times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.

Oct 01, 2009 | 2006 Jeep Grand Cherokee

1 Answer

2006 Jeep Gr. Cherokee Instrument Panel

This is just a routine service reminder, it can be reset by pushing the step button until you see 0 miles to service displayed, then just hold down the reset button.

Aug 17, 2008 | 2006 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jeep Liberty Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides