Question about 1983 Ford Fairmont

2 Answers

Indicators not working on ford fairlane

Indicators not working at all, power at fuse box and flasher unit bulbs all ok were to from here? Bulb not lighting up at all nothing showing in dash.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 298 Answers

The relay on the indicator circuit is most probably stuck on normally closed position. Get this checked before touching the entire circuit.

Posted on Sep 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Have you replaced the flasher unit yet ?

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazards and indicators not working suspect fuse or bulb but can't find fuse?


Box under steering should have two flasher units (small metal cans that plug in like fuses) one runs hazards and one runs turns. If someone has changed bulbs to LEDs you must run different flashers designed to work with LED bulbs.

Jun 22, 2015 | Cars & Trucks

2 Answers

How to fix rapid flashing turn signal when all bulbs are OK?


Easy way to find the location of the flasher unit: Turn on either the RIGHT or LEFT indicator, and listen for the click under the dash. When you find the source of the click, THERE'S THE FLASHER UNIT! :)

May 13, 2015 | Cars & Trucks

2 Answers

I have a 1990 ford areostar van the turn signals dont work,left,right,front,back. The emergency flashers work. When I turn them on before a turn they do shut off after the turn. Just NO lights come on


Check your fuses for the turn signal - also the relay unit could be bad - these are located drivers side just below the steering column (there should be a removable panel there) - I have an 89, and that is where it is on mine.- google aerostar fuse dia and you should be able to find the fuse box layout, so you know the ones to check.

I would have said to check a bulb, but since the flashers work, you know it's A) not a bad bulb, and B) not anything with the wiring...

Good Luck

Oct 19, 2014 | 1990 Ford Aerostar

3 Answers

Both my right & left turn signals aren't working but hazards are


If you can locate the hazrd flasher unit under the dash on the drivers side, the turn flasher unit should be right beside it and looks the same. Unplug and switch the 2 flashers and see if the turn signals work. The flasher unit is a silver and round. they are usually close to the stering colum. Let me know if that helps.

Mar 27, 2011 | Dodge Durango Cars & Trucks

1 Answer

Turn indicator light flashes quickly. bulbs fine


The quick flash is a fault detection for a burnt out bulb. If bulb is good, check bulb socket. Inspect for corrosion. If needed, replace bulb socket. Check bulb socket connector. Check if fuse. Check emergency flashers ( most cars have a separate circuit).

Jul 09, 2009 | 2000 Ford Windstar

2 Answers

Where is the fuse for the left turn signal on a 2007 Ford Freesty


replace the rear bulb it flashs fast to let you know the bulb is bad, whatever bulb is not flashing thats the bad bulb, should be a 1157 bulb or a 1156 if it has one contact it's a 1156 if two it's a 1157

May 24, 2009 | 2007 Ford Freestyle Limited

2 Answers

Indicators won't turn on


it could well be the indicator switch that is faulty

May 14, 2009 | 2000 Ford Escort

4 Answers

Front driver side turn signal light doesn't flash.replaced bulb,replaced socket,all other lights work on emergency flasher,except front driver side.rear driver side turn signal light works,but flashes...


replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

May 09, 2009 | 1998 Buick Century

1 Answer

Right Indicator Light (Amber Color) not working


Check the inside of the light socket for corrosion and make sure the light bulb is making a good contact in the socket. Use a test light and make sure there is power going to the socket as well.

Jul 28, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...