Question about 2005 Ford Mustang

1 Answer

Can i use my old rc car curcuit board on the rc helicoper i am trying to build ?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 5,660 Answers

[Haven't been involved with this for a Number of years, so bear with me]

You need the correct number of channels first of all.
Each channel operates something on the radio guided craft.
1.You need 1 channel to vary the throttle speed of the engine. (Makes the Main Prop, and the Tail Rotor spin faster or slower)
2.You need 1 channel to tilt the Prop.
[To go forward]
3.You need 1 channel to move the tail rotor vane. [To turn]

If the radio controlled RC car had the options, 1.Of how fast it would go, (1 channel),
2.The wheels turned, (1 Channel),
3.Plus had Lift, (1 Channel), you're good to go so far.
[Lift = RC cars that had option to raise the front end up, like a real car with hydraulics]

Next comes the question, of how far the radio controlled car's transmitter will transmit.
You not only have to take into consideration of how Far away from you, but also how far UP.

Fly out of range, and your 'bird' will drop to the ground like a Rock! (No wings to glide down)

Posted on Sep 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why would the brake lights quiet working on 1989 chevy 1500

Check fuses first. Then the brakelight switch then the bulbs. But the curcuit board in the tail light has a good chance to be bad. They burn the board out a lot in the GM trucks.

Aug 14, 2014 | Cars & Trucks

2 Answers

How long can the fuse to the fuel pump be out

All moder fuel injected cars and trucks have an Impact switch in the fuel pump curcuit . which can trip if the veihcel is hit hard Ie run into by anothe car in parking lot. You also have a fuel pump relay in that fuel curcuit and usually a curcuit breaker which is self resetting and not a fuse. How ever if there is a fuse in that curcuit and the fuse has blown it will be out forever. Hope this is some help

Mar 14, 2013 | 2008 Honda Element

1 Answer

I get a code 0340 on my 05 PT Crusier. Just started running real bad. step on gas and wants to stall like not getting gas. Can you help? Rc

p0340 is camshaft position sensor A-bank 1 curcuit malfunction, Its very likely you need a new cam sensor. check wiring also, the cam sensor is not expensive.

Apr 20, 2011 | Chrysler PT Cruiser Cars & Trucks

1 Answer

Torque converter switch code

p0719 is torque convertor clutch brake switch curcuit low. p0724 is same curcuit is high, p0741 is tc clutch system stuck off, p0742 is the same but stuck on. p1860 is torque convertor clutch pulse width modulator solinoid curcuit, p1887 is tc convertor clutch release switch malfunction.

Oct 06, 2010 | 2001 Pontiac Aztek

2 Answers


po113 is--IAT sensor curcuit high input, po403--egr curcuit flow malfunction. IAT is intake air tempurature curcuit, for egr take off and clean carbon build up from inside of engine to egr valve.

Jun 06, 2009 | 1999 Chevrolet Malibu

3 Answers

Car won't start/92 honda accord lx

under the blank pannel at the end of the dash board drivers side there is a rubber switch called and enersher switch ( sorry about the spelling)which stops the fuel.. hold it in for about two to three seconds then try to restart the car ... i work for honda in swindon but not worked on the old cars works for the new can be caused by shutting the door hard....

hope this helps ... jedi-inc...

Feb 09, 2009 | 1992 Honda Accord

1 Answer

Instrument cluster blank

The digital display is controlled by a processor board, and yes the board goes bad, but fixing it, well I have tried many times with no sucess, I always in the end got a rebuilt cluster from GM.

Nov 03, 2008 | 1992 Chevrolet S-10 Blazer

Not finding what you are looking for?
2005 Ford Mustang Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides