Question about 2003 Chevrolet Malibu

1 Answer

Locate, remove, and replace hazard/directional flasher

I need to locate, remove, and replace the hazard/directional flasher relay on my 2003 Chevrolet Malibu.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The flasher is part of the switch in the dash on that car. You will need to remove the plastic panel it is in. There should be 2 screws holding the panel on the under side of the instrument panel "hood" and the rest of the panel is held in with push in clips. Just carefully pull the panel out. Then disconnect the wire harness from the back of the switch, push in the tab on top and bottom of the switch and slide out the front of the panel.

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

92 caprice classic turn signals not working, but the bulbs are fine. Hazards, brakes, etc all work fine. Any ideas?


Yes, the problem is the turn signal flasher is defective. You can has two flasher relays. One for the turn signals and one for the hazard lights. That is why the hazard lights flash and the turn signals do not. Replace the turn signal flasher relay located on the drivers side of the steering column, mounted behind the instrument cluster in the convenience center. They are both mounted in the same location so turn on the hazard lights and the one that you put your finger on that is not clicking is the turn signal relay.

Mar 08, 2011 | 1992 Chevrolet Caprice

1 Answer

Replacing turn signal relay


the turn signal and hazard flashers are not seperate components. but the function is handled by a timer within the hazard warning switch. if a problem. call your malibu dealer or any chevy dealer for they may be able to help you. there is a free replacement of flasher units for 10 years or 150,000 miles. just tell them your hazard flashers are not working properly and you heard of a polocy adjustment to fix problem. good-luck! and have a vary good day. may god bless,

Aug 13, 2010 | 2003 Chevrolet Malibu

2 Answers

Where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb


Flashers and Relays REPLACEMENT Pickups The hazard warning flasher, on the pickup, is located to the left of the steering column, beneath the instrument panel, and is secured by a clamp and one screw. To remove it, simply unplug the electrical connector, loosen the screw, and slide the flasher out of the clamp. The turn signal flasher is located to the right of the steering column, beneath the instrument panel, and is secured in the same way as the hazard flasher. The turn the signal relay is located to the immediate right of the hazard flasher, and is secured by two screws. To remove it, unplug the electrical connector and remove the screws. MPV The relays and flashers are located under the dash, near the fusebox. Navajo Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel. prev.gif next.gif

Jul 15, 2010 | 1992 Mazda B-Series

3 Answers

My 2003 chevy impala turn signals won't blink. the lights come on but won't blink. I have checked the fuse. it looked fine.


Hi,

Your problem is your blinker or flasher, it is located under dash, behind the instrument panel right above the steering column. Cost is no more than $10.

If helpful, click below, GOOD LUCK

Apr 15, 2010 | 2003 Chevrolet Impala

2 Answers

Where is the turn signal\hazard flasher located?


it's in the auxiliary relay box behind the glove box.

13350 is base part number on flasher

Feb 03, 2010 | 2003 Ford F250 Super Duty Crew Cab

3 Answers

Where does the flasher go on a 98 chevy malibu


Replacement The turn and hazard flashers are integrated into one flasher on these models. The flasher is located in the hazard warning switch and the hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one.
  1. Remove the bezel from the ignition switch.
7f58edd.gif
Remove the bezel from the ignition switch

Carefully remove the instrument panel accessory trim plate.

9f5c3cc.gif
To remove the trim plate, use a suitable prytool to carefully apply pressure at the retaining clip points . . .

bd28884.gif
. . . then gently pull the accessory trim plate away

Detach the electrical connector from the hazard warning switch.

daa6205.gif
Unplug the electrical connector from the hazard warning switch . . .

Unfasten the screw securing the hazard warning switch and remove the switch.

c506713.gif
. . . then unfasten the screw securing the hazard warning switch and remove the switch from the vehicle


Installation is the reverse of removal.

Dec 01, 2009 | 1998 Chevrolet Malibu

1 Answer

I purchased a turn signal flasher for a 2003 chevy


THE TURN SIGNAL HAZARD FLASHER IS MOUNTED TO THE BRAKE PEDAL BRACKET ABOVE STEERING COLUMN.

Nov 07, 2009 | 2003 Chevrolet Cavalier

4 Answers

Flasher location


I believe the hazard/flasher relay is located under/left of the dash . I think if you remove the under panel under the steering column it should be attached to the BCM bracket under the dash on the left side.

Remove the left instrument panel (IP) insulator.
Remove the steering column filler panel.
Slide the hazard and turn signal flasher to the right, releasing the tabs from the Body Control Module (BCM) bracket.
Disconnect the electrical connector from the hazard and turn signal flasher.

Hope this helps.....

Apr 29, 2009 | 2003 Pontiac Grand Prix

1 Answer

Signals and Four Way Flasher working intermittently


Replace the hazard switch, It has the turn signal flasher built in to it.

Apr 09, 2009 | 2003 Chevrolet Monte Carlo

Not finding what you are looking for?
2003 Chevrolet Malibu Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...