Question about 2008 Ford Escape

1 Answer

2008 Ford Escape 4 Door 6 4wd... Bought Ford Brand side Window rain deflecters. they will not fit they are 1.5 inch to long. I also bought a aftermarket brand and they are the same. what am I doing wrong? Both ends go in on both ends all the way to where it starts to bubble out. This is the front windows.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Sounds like you might hve them upside down

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will 2010 ford escape electronic power assist fit 2008 ford escape


FOr the best advice, contact Ford customer service directly. Here's the link-

Oct 15, 2016 | 2008 Ford Escape

1 Answer

Passenger side door window off track and recessed in door


I have removed the screws I could find from the passenger front door of 2008 escape. The motor runs; I can see the loose cable and spring connector from the bottom. I cannot get the inside door panel loose after removing the retainer screws.
I am looking for specific instructions please. Thanks!

Jul 03, 2012 | 2001 Ford Escape

1 Answer

2008 Ford Escape heater blower no longer runs in position 1. Works great in positions 2 thru 4.


It could be the blower resistor. While I'm not familiar with the 2008 Escape, most resistors are located near the blower motor under the dash on the passenger side. It'll have a plug with several wires, and usually 2 screws holding it in.

Aug 07, 2011 | 2008 Ford Escape

1 Answer

I bought a used ford escape and want to change the door code. how do i do it. I know the old code Its a 2008


i think...and not sure, the only way is to go to the dealership and sign over ur first born OR pay like $700! I personally would hope little ford is raised right and keep the old code! lol

May 15, 2011 | 2008 Ford Escape

2 Answers

I bought a used 2008 ford escape. No owners manual. How do I reset the keyless entry. I don't know the original code.


did you mean the key pad on the door? if it is then you need to track down the original owner to give you the factory code then you can program up to 3 codes.
give the local dealer a call to see if they can run the VIN number for a factory code, they may charge you a fee.
if you bought it from a dealer then they must take care of that for you at no charge.
otherwise you will need to replace the key pad.

Mar 25, 2010 | 2008 Ford Escape

1 Answer

This is in regards to a problem I am having with my 2008 Ford Fusion. Every time there is a heavy rain water pools in the back seat floor board on both sides. I have taken it to the dealership where I...


GOING TO TAKE SOME DETECTIVE WORK. MAY
HAVE TO REMOVE SEATS AND APPLY GARDEN
HOSE TO DIFFERENT AREAS TO SPOT LEAK.
HAD A LEAK ON A MAZDA 626 DRIPPING ON
HEATER BLOWER MOTOR. TOOK TIME BUT I
FOUND IT.

Sep 25, 2009 | 2008 Ford Fusion

1 Answer

Double din radio doesn't fit in dash


i have a 2002 ford escape and i bought a double din radio and it did not fit and found out it is actually a din and 3/4 with out serious mods (cutting a bigger hole in dash) double din wont fit i bought a single din stereo and a din a 3/4 dash kit works fine

Jun 10, 2009 | 2003 Ford Escape

2 Answers

Need to replace broke window on 93 ford tempo.Pass. side


Door Glass, Front Removal
  1. Remove door trim panel and watershield. Refer to Section 01-05. ani_caut.gif CAUTION: Prior to removing center pins from the rivet, it is recommended that a suitable block support be inserted between door outer panel and glass bracket to stabilize glass during rivet removal. Remove center pin from each rivet with a drift punch. Using a 1/4-inch diameter drill, drill out remaining rivets as damage to plastic glass retainer and spacer could result.
  1. Remove two rivets attaching glass to run and bracket assembly.
  1. Remove glass.
  1. Remove drillings and pins from bottom of door.
Installation
  1. Snap plastic retainer and spacer into two glass retainer holes. Make certain that metal washer in the retainer assembly is on outboard side of glass.
  1. Insert glass into door.
  1. Position glass to glass bracket. Install two rivets to secure glass to glass bracket. NOTE: Two 1/4-inch-20 x 1-inch bolts and two 1/4-inch-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (36-61 lb-in). Equivalent metric retainers (6mm) may be used.
  1. Install door trim panel and watershield. Refer to Section 01-05.


2-Door Vehicles


n5878h.gif



4-Door Vehicles


n5879g.gif

May 29, 2009 | 1993 Ford Tempo

1 Answer

Door issue


no difference from 93 to 98. you need to move door hinges.

go here for villager/quest help

http://autos.groups.yahoo.com/group/villagerquest/

Apr 18, 2009 | 1993 Mercury Villager

Not finding what you are looking for?
2008 Ford Escape Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...