Question about 1990 Toyota 4Runner

2 Answers

Have no indicators, or hazard lights, have replaced the two fuses that were blown, I have power to both sides of fuses but still nothing working. is there maybe another fuse I am missing, it's a hilux 4x4 ln106R model.

Posted by on

  • Anonymous Mar 31, 2014

    how do i replace the fuse

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 70 Answers

Sounds like a bad flasher-they do occasionally go bad where they actually cause the turn signal lights to stop working all together.

Posted on Sep 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

Replace the flasher relay. Located Front seating area, driver side, under dash, driver side of steering column, mounted in relay bracket. Courtesy: Auto Zone.

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right indicators not working on Mercedes 270ml, hazards only work on left side. Only checked back bulb(not blown) fuse not blown either. Any help appreciated


check right side bulbs to verify they are correct bulbs especially the tail light bulbs.....commen on imports...if all Bulbs are good then replace flasher unit under dash....before replacing blinker lever at steering column

Aug 13, 2016 | Cars & Trucks

1 Answer

No hazard lights and no turn signals but every thing else works, HELP? I had a push button start installed the wire is connected into the blue fuse on the side wall just behind the battery, related?


the signals work off of the hazard flasher. the hazards are wired to constant power.if you run a fused wire from the hazard switch to the battery it all should work.
somehow the hazard power source got lost.check that there is not a blown fuse in the fuse box. a starter solenoid draws a good amount of current.they may have blown a small amp fuse looking for a power source.
patching into a fuse box for power is not high caliber work.

Mar 15, 2015 | 1994 Nissan Pickup

4 Answers

Turn signal lights don't work


The first place to start are fuses, check your owners manual for location, typically left side of dash.

The emergency (hazard) flashers and turn signals are on separate fuses and run through the hazard switch. If all the lights work when the hazard switch is on then the problem will likely be a blown turn signal fuse.

Other possibilities are the hazard switch itself is bad, the turn signal switch is bad or a broken wire, all of which require a meter (or test light) wiring diagram and knowledge of the circuit to test it - better to have it done.

Robert Grove
Mobile Mechanic Malibu 310 651 8020 Auto Truck RV Mobile Repair...

Aug 09, 2014 | 2002 Chevrolet Impala

1 Answer

Indicator and hazard not working in clio


CHECK THE FUSE BOX FOR blown flasher fuse. Dont think thats it but its 1st step. I think it is a bad flasher switch, if its not the fuse. Replace the switch. mike

Jun 21, 2014 | 2002 Renault Clio

1 Answer

Vauxhall Meriva 1.4 Life - indicators not working on R side, replaced relay, however now neither side are working. Can anybody help with a solution? Many thanks


Vauxhall indicator problems on one side is always the big yellow relay under the black cover on pass side under bonnet. If none working now check its fitted properly, fuse not blown and not a defective relay. One relay works hazards and both sides of indicators. So are hazards working?

Nov 02, 2013 | 1985 Volkswagen agon

1 Answer

Turn signal not working


Press the Hazard switch on and check the turn indicator lamps. Replace the faulty lamps.
If the hazard lights do not work then the trafficator flash can is faulty provided the trafficator fuse is OK.
Check the fuse for the turn indicators, if it is blown the replace the fuse.

Dec 11, 2011 | 2002 Kia Rio

2 Answers

No hazard lights


Check the hazard switch and the connector to hazard switch see if u have the power and earth to hazard switch if there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem

Jun 16, 2009 | 1997 Mitsubishi Mirage

1 Answer

I have a 2002 audi tt, the indicators are not working but the hazard lights are still working


check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse

May 20, 2009 | 2002 Audi TT

1 Answer

Indicators not working


Do the signals light up, but just don't flash? If that's the case, Turn your hazard flashers on & listen for clicking sound from flasher/relay ,usually under dash, at or near, fuse panel. Once you locate that one, the other flasher/relay for your signals should be in same area, and probably looks same too. If the #s written on them are the same, try swapping them to try & see if signals now work.If they do, replace the bad one, but put new one in for signals. If they don't don't come on at all, you'll have to start pulling fuses for a look & see if burnt out. If you have a 12volt test light you can simply touch on little metal tabs at ends of fuses without pulling out, to test. If power on both sides, fuse is good. If you use test light, make sure key is on & signal is on while testing for bad fuse. Power on one side, but not the other, pull it & have a look.

Mar 08, 2009 | 2000 Audi A8

Not finding what you are looking for?
1990 Toyota 4Runner Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...