Question about 2000 Ford Crown Victoria

2 Answers

2000 Ford Vic PI 4.6L no hazard lights, no headlights, no turn signals, no interior lights/dashlights. Does have bypass lights and brake lights. Checked fuses and they are fine...any ideas?

Posted by on

  • boberuski Sep 06, 2009

    yes, unfortunately just purchased...I'd bet good money the previous owner took it out. :-(

    I went to a parts store and they sold me a "flasher unit" that doesn't even exist in this vehicle...I was pulling my hair out trying to find this non-existant part. I did some research after posting the question and discovered the LCM...then your post confirmed my what my research found.

    Now where to find a working used one or shell out $350 for a new one...We'll see.

    Once again thanks for your help.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 70 Answers

I work on plenty of police and non police crown vics(mostly 2003 and newer) but i am not 100% sure if this car has a LIGHTING CONTROL MOBULE. the newer ones do. this module controls the headlights,interior lights,turn signals.etc. it is a black box located above the brake pedal but off towards the pass. side.not far from the OBD connector.i wanna say it has 2 or 3 electrical plugs. it would also help if you get a WIRING DIAGRAM. i dont know how much they cost but maybe try swapping in a used or alot of times ive been able to open up the plastic "case" and look to see if anything on the circuit board looks burnt. let me know if this helps!

Posted on Sep 06, 2009

Testimonial: "yep...looks like I don't have a lighting control module at all...I have 3 connectors that are stuffed just above the gas pedal.:-( thanks 4 the help."

  • james kirch Sep 06, 2009

    im just curious- did u just buy the car and possibly the previous owner remowed the LCM(LIGHTING CONTROL MODULE) ?? im glad i could help--some companies seem to make their autos more complicated then they need to be - ford is a good example - which means fixing cars correctly has gotten harder over the years-being a good mechanic is more mental than physical sometimes.

  • james kirch Sep 10, 2009

    $350.00 for a new one??!!! thats crazy! im thinking theyre not available aftermarket?? i cant say that they go bad that often as i really havent changed more than a few and i do work for local county gov't fleet of crown vics,tauruses ,escorts etc. so i work on a good amount of police cars and if something is gonna fail it would be on THOSE CARS.SO I THINK U SHOULD BE OKAY BUYING A USED ONE. LET ME KNOW HOW U MADE OUT!

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Ford Expert
  • 93 Answers

If you have a 1999-2011 Mercury Marquis, Mercury Marauder, or Crown Victoria, and your headlights and or tail lights don\'t work, Ford just finally extended the warranty on your LCM (Lighting Control Module) for free - both parts and labor and will install a new one for free! Ford has extended the warranty to 15yrs/250,000. Must be done at Ford and the fix is free. Have your VIN # ready and call your local Ford Dealer and tell them you need to make an appointment because your lights don\'t work and Ford has extended your warranty on the LCM. Tell them it is the Customer Satisfaction Program 14N01. If they act stupid ask to talk to the manager or tell them to call Ford Motor Company and ask them or you can call Ford yourself. We just had ours done on 8-12-14 in at a Ford dealer Scottsdale, AZ. It must be done by a Ford Dealer. If you have a 99 you better call right away as it is a 15 year warranty.

Posted on Aug 15, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why did headlights and dashlights quit working?


Fuse is your first step. Check those out and if it is not that then you may have something a bit more complicated like a grounding issue.

Sep 04, 2015 | 2003 Dodge Durango

1 Answer

Turning my headlights on blows the fuses to running lights and dashlights


headlight switch is bad, change the headlight switch itsellf will short out, therefore blowing your fuse. turn signals and break lights are on a different relay, therefore they will still work

Sep 07, 2012 | Subaru Legacy Cars & Trucks

2 Answers

1999 ford crown vic dash light running light problem.


Check all the bulbs at tail end for parking and brakes, test grounds and harness for trailer. Check fuses. clean batery terminals, Re instal head light swich properly and make sure all wires conect.
Vitally

Sep 09, 2009 | 2000 Ford Crown Victoria

1 Answer

Parking lights, tail lights, and dashlights do not work.


Possibly the headlight switch. Remove the switch and check with amultimeter

Apr 04, 2009 | 1991 Ford F250

1 Answer

1993 astro van


try replacing the crankshaft sensor

Sep 04, 2008 | 1993 Chevrolet Astro

Not finding what you are looking for?
2000 Ford Crown Victoria Logo

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...