Question about 1995 GMC Safari

Open Question

Need to no how the door handle hardwear hooks up to the handl a sprang and a wash was in the bottm of the door

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Chevy Astro. Needs rear door handle replaced.


remove door panel then you will see where the inner door handle is mounted to the door. un hook linkages to handle then find the 2 nuts that fasten the handle to the door and remove.

Apr 22, 2015 | 2000 Chevrolet Astro

1 Answer

Replace door handle


You must be talking about the door handle itself. The rod connects the door handle to the door latch. The plastic clip when snapped onto the rod will keep the rod from coming out of the hole in the door handle where it attaches. Is it the handle that is broke or the clip?

May 23, 2013 | Chrysler 300M Cars & Trucks

1 Answer

What parts do i need to repair the front door handle on my 2005 ford focus zx4. handle still there but doesnt open


there is a skinny rod that hooks up to the handle the little washer looking piece holds it in place it might have fallen off

Feb 28, 2013 | 2006 Ford Focus

1 Answer

Door on a driver side does not work I put a new door handle now it doesn't work?


Can't tell from the vid but you did hook up the rod from the handle to the latch mechanism, correct? There should be 3 different rods hooked to the latch, one for the lock, one for the inside handle and one for the outside handle. make sure the one for the outside is hooked up at both ends. Then disconnect the one going to the handle and try actuating the latch by pushing/pulling the rod. If you can't actuate it that way, the latch may be broken internally and will need to be replaced.

Oct 14, 2012 | Cars & Trucks

1 Answer

The front passenger door will not open with the outside door handle or the interior door handle. after taking the inside door cover off, i discovered the interior door handle is broken and the connector...


The locking mechanism is manufactured with carbon composite and plastic levers that the door handles attach to. It is hard to tell what parts that you do need. Remove the passenger side door panel. It will have some screws and maybe a bolt on the inside handle. The panel has snap plug on it and they fit into designated hole in the door. After getting the door panel off, be careful here, there are sharp metal edges that can cut. There are some peep hole to see the rods and connector inside the door. If the plastic hooks on the door locking mechanism are broken. The hole door lock assembly will need to be replaced.

Try your local wrecking yards and tell them what type of vehicle you have and year. Also, state what door it is and what you will need.

Now, if the interior door hand hook on the lock mechanism isn't broke off. The get a cloths hanger and straighten it out and attach it to the opening latch on locking mechanism. This will give you inside temporary handle, while you are trying to fix the door. Safety. GB...stewbison

Sep 06, 2011 | Nissan Sentra Cars & Trucks

1 Answer

Passenger door latch does not open from out side


You need to remove the inner door panel on that door. After it is removed check that the rod to the door handle is still hooked up, You may find that it is connected but broken off the door handle itself. If that is the case install a new outer door handle on that door, hook the rod up and it should work.

Apr 26, 2010 | 1998 Oldsmobile Aurora

1 Answer

Broken door handle for 1990 subaru loyale.


There are a few after-market sellers who offer door handles for most cars on ebay, reasonably priced. Go to www.ebay.com and enter "Subaru Loyale door handle" in the search bar. Alternatively, you can order one from a salvage yard, try www.car-parts.com. And of course, if money is no object, you can check with your local Subaru dealer's parts department.

Replacement is not too hard. You may be able to do it without even removing the door panel. There is a screw that holds the handle in the door. Undo it, then slide the handle back and forth gently to loosen it from its set holes, and pull it away from the door panel. Then unfasten the door lock connecting rod/hook from the back side of the handle assembly. Fasten the new handle on the hook, re-insert into the door panel, set the handle in place, and replace the holding screw.

Mar 17, 2010 | 1990 Subaru Loyale

1 Answer

I am trying to fix a door handle that will not open from outside


Turn the window handle to where you can see a small 1/2" slot rt at its base where it meets the panel.you'll notice a small brass v shaped clip,you'll need hooked pick or something simular to hook this clip and pull it out of its slot,this release's window crank handle. Once this is off the rest of panel is held on by plastic panel clips that pull loose by pulling panel outwards from door ,and also by a few various screws. once panel is off temp. slide window crank back on and crank window all the way up. You then should have clear view of outer door handle. Handle has two rods attached to it,one for lock assy., one for latch release.This is the one you'll be looking at.Most likely you will find rod has came loose due to broken retainer clip at handle,or casting on handle itself has broken off.If clip is broke you can buy new clip at dealer or at some autoparts outlets,replace and reattach rod(make sure rod locks into place).If handle casting is broke will need handle replaced.It is held in place by two 10mm bolts,two rods preeviously mentioned. If handle is body color matched will need color code(on door jam sticker)to order handle from dealer to match.Lock assy will need to be transfered to new handle,it is held in by two spring clips.You notice two holes one on each side of lock,you will need to push release clips inwards through each hole to release lock and slide it out.to install just push down into newhandlle until clips engage. Let me know if you run into problems. Good luck and if this was able to help you please leave me some positive feedback. Thanks and good luck, Joel

Oct 12, 2009 | Honda Civic Cars & Trucks

1 Answer

1998 exteriour door handle does nothing when lifted


take the inside pannel off of your door...up where your door handle is you should see something that looks like a hook loop ... this will be on the door handle assy itself .... now there should also be a peice of metal that is long and the end is in the shape of an L or U... hook the metal into the hook on the door handle and it should fix the problem...

Aug 30, 2009 | 1997 Toyota Camry

1 Answer

I need to take off the drivers door inside panel and replace the door handle


usually the door handle comes off by removing a clip on the back side of the handle you need to push in on the panel and look to see it, fabricate a piece of coat hanger with a needle nose plies to make a small hooked end and while pushing in on panel try to hook onto and pull out clip.

Jul 02, 2009 | 1993 Geo Metro

Not finding what you are looking for?
1995 GMC Safari Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...