Question about 1995 Ford F150 Styleside Regular Cab

Open Question

1995 Ford f-150 when I turn the driving lights the

1995 Ford f-150 4x4 when I turn the driving lights the engine shuts off, also when the right turn signal is click it also kills the engine?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Firing order for Ford F-150 4x4 302 engine automatic

If you have a stock intake manifold it should be stamped on it. I've seen the stampings on the right side front.

Sep 06, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

I have a 06 Ford F-150 and the engine has shut off while driving?

Fuel Pump or clogged filter. Only a couple possiblities,could be other issues.

Did you get a check light on dash?

May 04, 2010 | 2006 Ford F-150

1 Answer

Is there a indicator light for 4x4 lo and 4x4 hi on a 2006 f-150

Should be to the right of the oil pressure gauge and engine temp gauge on the cluster. The indicator lamps are stacked and should be 4x4 Hi and 4x4 Low.
Page 12 of your owners manual

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :

Dec 31, 2009 | 2006 Ford F-150

1 Answer

2005 ford f-150...4 wheel drive will not

Operationally vacuum holds the IWE ( Integrated Wheel Ends ) out, and once vac is removed the spring engages the IWE.

Lift and support the front of the truck so the front wheels are off the ground ( take safety precautions, chock wheels, jack stands, etc )
Key on, engage 4x4 and try to turn the front drive shaft.
If it turns it is a problem with the transfer case.
If it doesn't it is a front axle engagement problem.

- If the front drive shaft does not turn :
Shut of the truck ( still jacked up, and supported ) remove the vac lines from the IWE. The spring should push the gears in, without the vac line on.
Check the vent line ( tube that is routed into the engine compartment with nothing attached to it ), for blockages.
If the vent line is clear, and with the vac lines off the IWE should be engaged ( both front wheels locked ).
If they lock, the problem is with the IWE solenoid not shutting off vacuum to the IWEs. There is a TSB on the 2004-2006 IWE solenoids, a newer revision has been made, and used from 2007 and newer MYs.

Here is a block diagram of the IWE system

Dec 19, 2009 | 2005 Ford F-150

1 Answer

I just got a 1995 Ford 150 4X4

1. Press in the clutch
2. Move the gear shift
3. Release the clutch

If you don't understand this, then you shouldn't be driving.

Oct 18, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

85 f-150 4x4 runs great but sometimes yuo get in ,

Check & clean all battery connections as well as check connection at starter. Make sure battery is good too. (load test)

Jul 05, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

1994 Ford F-150 4x4 transfer case won't shift out

Vacuum Leak by the auto/man hubs??? Just a starting point....... Does it sound like something is happening when you use the switch?

Jun 04, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

Stuck in 4x4 high

Could be the switch or the controller motor on the transfer case.

Apr 19, 2009 | 2008 Ford F-150

Not finding what you are looking for?
1995 Ford F150 Styleside Regular Cab Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides