Question about 1990 Chrysler New Yorker

1 Answer

After 5 yrs of no alarm problems I unlocked the passenger door (all doors were powerlocked). The alarm went off. I tried to reset it following manual. Did not work.No one can figure it out, including Dealer.

Posted by on

  • 1 more comment 
  • basesix Sep 05, 2009

    Hi,
    I have unhooked the negative terminal, as have a repair shop and a Chysler Dealer, where car is. But not for exactly one minute . I will tell them to try this. Do you have another fix if this does not work?

    RSVP,
    Eric


  • basesix Sep 05, 2009

    I can't notify the Dealer where the car is until this Tuesday. The car is at Gables Chysler in Cobleskill, NY. I am in NYC. I will let you know ASAP. DO you have any other suggestions at this time?

  • basesix Sep 05, 2009

    I won't know until this Tuesday when the Chrysler dealer opens and I tel the service manager. DOUG at 518 234 1075, Gables Chrysler Cobbleskill NY

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 788 Answers

I had this happen on my Chrysler too. I had to unhook the Negative terminal on the battery for 1 Min. That was the fix.

I hope that this helps you out.
Let me know
asnowman

Posted on Sep 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I went to unlock the driver side door of my 91 acura legend and i guess i set factory alarm off.i do not have original key and my car wont start.. help p[lease!!!!!


The alarm must of activated , the alarm is controlled by the locks, go to passenger door and use the key to lock and then unlock the door, this will shut down alarm, you may have to use the passenger door to shut down alarm due to a bad switch in drivers door, this will allow you to start the car, you can also not lock door and alarm may not arm. let me know if the passenger door lock works, good day.

May 24, 2012 | 1991 Acura Legend

1 Answer

All my remotes won't unlock passenger doors, why?


this is a problem that can appear after your car battery died, cause the car didn't reset propely, so taking the battery out and putting it back in or letting your car die again would do the trick. I tried a lot of reprogramming procedured for my remote key, none of them worked, what did the trick though was simply unlocking the doors via the all door unlock button on the passenger side door, so simple.

Apr 27, 2012 | Cars & Trucks

1 Answer

Car alarm went off while unlocking the door, now


you need to reset alarm/immobiliser.lock car with remote, hold button down for 30 secs,then press/hold down unlock button,should reset.another way is with key in ignition/turned on, press alarm button down and hold for 30 secs.this resets immobiliser.toyota
systems vary..depending on market.

Mar 30, 2010 | 1991 Lexus LS 400

1 Answer

I have a 02 silverodo battery went dead i charged battery reinstalled it it starts but dies and with the key out of the ignition security light stays on


you need to disarm the alarm. unplugging batt. or dead battery being jumped sets of the alarm not all alarms make noise
use remote to lockand then unlock doors need to be closed
or lock then unlock door with key if it dont reset then try passenger door

Mar 22, 2010 | 2002 Chevrolet Silverado 1500

2 Answers

Security alarm on so car won't start


24,
Try locking/unlocking the passenger door with the key into the door lock to reset the alarm system. If the passenger side doesn't work, then try the driver side. Good luck.

Sep 29, 2009 | 1998 Chrysler Town & Country

1 Answer

1995 Volkswagn Jetta door lock fell off and alarm went off, car w


the same thing happened to my 1996 jetta trek.

when the alarm went off on me and the car would not start i walked around to the passenger door, locked and unlocked it, therefore the alarm went off.

but the alarm only went off if the car battery was low and had trouble starting.

Jan 15, 2009 | 1996 Volkswagen Jetta

1 Answer

Alarm wont shut off and I can't start vehicle


use the key and unlock the trunk...if that doesnt work do the passenger door...that should reset the alarm...

Jan 15, 2009 | 2004 Nissan XTerra

Not finding what you are looking for?
1990 Chrysler New Yorker Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...