Question about 1991 Plymouth Grand Voyager

1 Answer

Neither the radiator or condenser fans are working on my 1991plymouth grand voyager LE, 3.3L, although they will if hotwired. I'm trying to find the fusible link for them, but don't know what it looks like. The manuals say it's behind the battery.

Posted by on

  • Mike May 11, 2010

    There is a thermal control for these fans, have you located and tested that device?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

What about the relays, did you check them too?
Fusible links are just wires that feel a little more rubbery on the coating, for lack of a better description.

Posted on Sep 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Radiator replacement

on the side of the radiator there are transmission cooling lines, passenger side. you might have oil cooling lines on the other side. sounds like you have the rest done

Jun 22, 2010 | 1993 Plymouth Grand Voyager

1 Answer

How do you install radiator on chrysler 2002 town and country

Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004
Radiator - Removal & Installation
  1. Disconnect the negative battery cable.
    CAUTION Do not remove the radiator cap or drain with the cooling system hot and under pressure or serious personal injury can occur from hot pressurized coolant.
  2. Place a drain pan under the radiator drain. Open the radiator drain plug and allow the coolant to drain.
  3. Remove the air intake resonator from the air cleaner assembly.

    Fig. Before removing the hood latch, mark its location on the crossmember with a paint marker or other tool


    Fig. Once the hood latch is matchmarked, remove it from the crossmember (without disconnecting the cable) and set it aside
  4. Remove the Coolant Recovery System (CRS) overflow tank filler neck hose.
  5. Disconnect the cooling fan electrical connector located on the left side of the cooling fan module.
  6. Remove the CRS overflow tank mounting screw from the upper radiator crossmember.
  7. Remove the upper radiator-to-crossmember mounting screws.
  8. If equipped, disconnect the engine block heater wiring connector.
  9. Remove the upper radiator crossmember.

    Fig. Remove the grill extension...


    Fig. ...and the upper radiator-to-crossmember bolts, then . . .

    Fig. ...unbolt the crossmember . . .

    Fig. ...and lift it from the front of the vehicle
  10. Remove the entire air cleaner assembly.
  11. Disconnect and plug the automatic transaxle oil cooler lines from the radiator.
  12. Disconnect the upper and lower radiator hoses from the radiator. Remove the lower radiator hose clip from the cooling fan module.
  13. Remove the A/C condenser mounting fasteners and separate the A/C condenser from the radiator. Be sure the condenser is supported in position.
  14. Remove the A/C filter/drier mounting bracket, 2 mounting bolts to the cooling fan module and 2 mounting nuts to the filter/drier. Remove the mounting bracket.
  15. Carefully lift the radiator out of the engine compartment. Be careful not to damage the radiator cooling fins or water tubes during removal.


Mar 27, 2010 | 2002 Chrysler Town & Country

1 Answer

02 jeep grand cherokee not running when temp gets high. replaced radiator fan relay

If it's still getting too hot (above 210F) check the radiator for internal plugging and externally for obstructions (leaves etc between radiator and A/C condenser, condenser plugged with bugs etc) If radiator takes a long time to fill generally it is internally obstructed. You replaced the electric fan coming on now? is clutch fan working? Is aux fan working with A/C? Any external leaks? any steam from tailpipe? You have a bunch more to look at!!!
Good luck
Problem with anything while testing, just ask!!

Oct 10, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Radiator fans stopped working

Aaaghhhh. you probably have an air bubble in the cylinder head. not good. poor as much antifreeze as you can into the rad (make sure the inside temperature is set to hot, that way any air in your heater core will be flushed through.) You need coolant to be in the hoses before you worry about the fan. Also, you can try "burping" the coolant system by filling up the vehicle (when its COLD) so that the coolant level is flush with the top of the rad. then place cap back on. start the motor. SLOWLY unscrew the cap to the half way mark. ensure not coolant squirting out. If okay, unscrew all of the way and check coolant level. fill as needed. try this, if you still can't get the fan to work, and you still don't have coolant circulating in the upper hose, here's my email (no porn subscription please)

Sep 28, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Grand voyager screeching

check your tensioner had to replace it on mine and it got rid of the screeching.

Jul 08, 2009 | 2000 Chrysler Grand Voyager

2 Answers

1992 plymouth grand voyager

yes, the engine gets hot and has a shut off to protect it from overheating to badly. Repair the fan and see if the problem is corrected. If not please let me know. Thanks

May 28, 2009 | 1992 Plymouth Grand Voyager

1 Answer

Replacing radiator fan motor on 2000 chrysler grand voyager

Disconnect the wires leading to both of the fans. Remove the cross-member that goes over the radiator. Remove the four bolts securing the fan assembly and lift it out.

Apr 13, 2009 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
1991 Plymouth Grand Voyager Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides