Question about 2000 Mitsubishi Eclipse

1 Answer

Anti-lock light comes on along with the break warning light, fluid level good no softening on the break pedel...no identifiable difference in performance but the lights remain on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

ABS ligth coming on for no reason is usually dirty sensors on one of the wheels. can often happen after driving through mud etc, Also the serrated disc which the sensor looks at on the hub can get clogged up causing same problem. brakes will still work ok but you will have no ABS function. I have had limited success with this (very common) problem by pressure washing the wheels and hubs. failing that its a case of wheels off and cleaning it all up by hand. Another cause can be bad connection, cracked/trapped sensor wire. Difficult to tell which wheel its on though.

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Brake warning light comes on. I checked the brake fluid level in master cylinder & it was okay. The fluid looked dirty. Please help


Sharon, Check to make sure emergency brake is not on and fully released, try not to drive your vehicle if the red brake warning light is on. Could have air in the system from a small crack in brake line, faulty master cylinder, faulty caliper etc. Have a good tech. check braking system, diagnose and estimate repair.
Brake Warning Light
Brake Hydraulic System Red Warning Light
What do the brake warning lights mean in my car HowStuffWorks

Aug 18, 2016 | Cars & Trucks

2 Answers

2010 Dodge Grand Caravan break light stays on in dash.


Check the level of your brake fluid or your brake pads may be worn down and time to have them checked out.

Apr 01, 2015 | 2010 Dodge Grand Caravan

2 Answers

Why would the break light in my car be coming on? It doesn't do it all the time. My breaks are working fine. No grinding or anything. It will just beep and come on sometimes while Im driving. I have a...


The warning brake light has a dual purpose. Check your brake fluid and check your brake light bulbs. If it is low on fluid, it will trigger the light. If the bulb is lose or weak, it will also trigger the light. Good luck!

Aug 30, 2011 | 2002 Dodge Stratus

1 Answer

A roundish warning sign shows on the dash. Is it a break warning sign?


Audi have sensor contacts in the break shoes, and when the shoes wear to the service point it earths the system and the warning light comes on.Also you should check the fluid level in the brake fluid resovior.

Mar 31, 2011 | Audi A6 Cars & Trucks

1 Answer

(!) with a squiggly line in-between 2008 dodge caravan


Sounds like a brake light. Check your brake fluid and fill to the correct level if low then see if it goes out.

The Brake light says "BRAKE" is the Brake System Warning Light: "This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system (if equipped)."

Another is the Anti-Lock Brake System Light: "This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on."

It could also be the Tire Pressure Monitoring light. Check the brake fluid first and see if that fixes it.

Mar 23, 2011 | 2007 Dodge Caravan SXT Minivan New Cars

1 Answer

Abs anti-locking faulty light came on filled brake fluid so how do I reset the warning light truck won't start till I reset code


The anti lock brakes have nothing to do with the truck starting.I believe you have 2 different issues.What you need to do is see if your getting fuel pressure.If your getting fuel then you need to check and see if your getting spark at the spark plugs.As far as the ABS you need to get the codes to see what is causing the light to come on.The only way to clear the codes is with a scan tool.But it has to be repaired first or the light will come back on.The fluid being low will not make the ABS light come on,just the regular brake light.Once you get the codes just post back with the year and motor of your vehicle and I can help you out with your problems.Hope this helps.Good luck.

Sep 15, 2010 | Chevrolet Colorado Cars & Trucks

1 Answer

The ABS anti lock warning light is on


Could be as simple as low fluid level in the master cylinder. Check that first and then if it is not low or filling it and making a few starts and stops does not kill the light then stop by your local parts store and they will read your codes for free and tell you what the problem is. Free is good, bad brakes is bad, but hopefully it is just the fluid level.

Nov 13, 2009 | 1996 Chevrolet Silverado 2500

2 Answers

2003 Mitsubishi Montero Sport Anti lock light comes on, what could be the problem?


could be any number of break problems, it is just telling you that the breaks need checking and before something fails.

Oct 26, 2009 | 2003 Mitsubishi Montero Sport

1 Answer

Can't identify what warning light means


Hey.
Don't drive anywhere til you check your coolant level . I think you'll find that you are very low on antifreeze. Check the rad cap while the engine is COLD, hate to see you get scalded by hot fluid.
Good luck

Apr 12, 2009 | 2003 Saturn VUE

1 Answer

Anti-lock dash warning illuminated


check brakes fluid level and also check to see if the sensor was connect back after the pads was change. If all is ok then take it to Auto Zone and they will scan it and clear the code for free also you can clear the code by disconnecting the negative battery lead for 10 seconds but this might make your radio ask for a code in order to play it. good luck

Jan 20, 2009 | 1999 Buick Regal

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...