Question about 1999 Toyota Sienna

1 Answer

I installed ignition wires wrong on my 1999 Sienna.... does anyone have the proper wiring number from the front coils to the rear plugs. Thanks!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

1999 Toyota Sienna CE
3.0 liter DOHC V-6 (1MZ-FE)I installed ignition wires wrong on my 1999 - 105860447.gifI HOPE THIS HELPS. PLEASE LET ME KNOW IF YOU NEED ANYTHING ELSE. THANKS FOR USING FIX-YA AND FOR ANY COMMENTS YOU WISH TO POST. GOOD LUCK

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spark plug wires


each plug wire will go to coil pack. coil pack is numberd as to what wire goes where. rear bank towards fire wall will be plug #1,3,5, front will be 2,4,6

Apr 14, 2013 | 1999 Dodge Caravan

1 Answer

I have installed the spark plug wires on my 1998 camry 4 cyl 2.2 l engine,but it's not starting and I think they are on wrong.Could tell me the correct way on both sides of the wires?


anyone that changes plug wires needs to change one wire at a time then there is no problem,for some reason people believe that it`s only a 4 cylinder how can i mess up 4 wires but people do it all the time if the ignition coils have numbers by the wire towers where the plug wires are connected those are the cylinder #`s that refer to the engine cylinders.#1 cylinder is at the front or far left when you are facing the front of the car then 2 then 3 then 4 as you look towards the right.you just have to match the plug wire with the cylinder to the # on the coil towers.the firing order is 1,4,3,2 for this engine

Mar 02, 2011 | Toyota Camry Cars & Trucks

2 Answers

How do you install a ignition control module in a 1999 Intrigue?


It should be on the front of the engine right by the coil. The coil is the thing which has 1 fat wire going to the distributor. Look at where the wires are that go into the coil, they will lead to the ignition.

Feb 17, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Im changing the wires on my f150 4.2L v6 2wd. now im not sure what order my wires went. i tried to do it one at a time. but i did sumthin wrong, cause when i got to the last wires i needed a small wire and...


The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

found this online hope it helps

Nov 07, 2009 | 1999 Ford F150 Regular Cab

1 Answer

How do i change the wires and plug wires om my taurus?


Follow the wires from your ignition coil (located at the drivers side of the engine) to the spark plugs. Unplug these wires. Using a 5/8" sprak plug socket (deep well with a bit of rubber at the bottom to protect the union of the wire to the plug), unthread the spark plugs. Place new plugs in the cylinder heads (you can use a thread protector available at the counter of most auto parts stores). Plug your new wires into the newly installed new spark plugs. The ignition coil has a diagram telling you which port is for which cylinder. On the V-6 3.0L Vulcan engine the rear bank from left to right is 1-2-3 and the front bank from left to right is 4-5-6. There you have it.

May 01, 2009 | 1999 Ford Taurus

3 Answers

Coil pack. what and where is it? what does it look like?



 
 
Ignition Coil
Removal & Installation
4.2L Engine
1997-2000
To Remove:

Before servicing the vehicle refer to the precautions at the beginning of this section.
Remove or disconnect the following:
The ignition coil electrical connector
The radio ignition interference capacitor connector
The locking tabs
The six ignition wires, marking for reinstallation
The brackets
The spark plug wire set
CAUTION
Spark plug wires must be connected to the proper ignition coil terminal. Mark spark plug wire locations before removing them.
The accelerator cable bracket nut
The accelerator cable bracket bolt
The accelerator cable bracket and position it aside.
The two ignition coil nuts
The ignition coil stud bolt
The ignition coil
To Install:
Install or connect the following:
The ignition coil
The two ignition coil nuts
The ignition coil stud bolt
Torque to: 71-98 inch-lbs (8-11 Nm)
The accelerator cable bracket
The accelerator cable bracket nut
The accelerator cable bracket bolt
Torque to: 71-98 inch-lbs (8-11 Nm)
The ignition coil electrical connector
The radio capacitor connector


CAUTION
The Spark plug wires must be connected to the proper ignition coil terminal.
Squeeze the locking tabs and connect the six ignition cables.
2001-2003
To Remove:

Before servicing the vehicle refer to the precautions at the beginning of this section.
Remove or disconnect the following:
The ignition coil electrical connector
The spark plug wires, marking for reinstallation
CAUTION
The sparkplug wires must be connected to their correct ignition coil terminal.
The ignition coil
The bolts
Inspect the ignition coil for carbon tracks or damage.
To Install:
Inspect the ignition coil for carbon tracks or damage.
Install or connect the following:
The ignition coil
The bolts
Torque to: 53 inch-lbs (6 Nm)
The ignition coil electrical connector
The spark plug wires, in their original positions
4.6L Engine
1997-1999
To Remove:

NOTE: This procedure is for either RH or LH ignition coil.
Before servicing the vehicle refer to the precautions at the beginning of this section.
Remove or disconnect the following:
The ignition coil electrical connector
The radio capacitor electrical connector
The spark plug wires by squeezing the locking tabs (four each side)
CAUTION
The spark plug wires must be connected to their proper ignition coil terminal. Mark spark plug wire locations.
The bolts
The ignition coil
To Install:
NOTE: The procedure is for either LH or RH ignition coil
Install or connect the following:
The ignition coil
The bolts
Torque to: 44-62 inch-lbs (5-7 Nm)
The ignition coil electrical connector
The radio capacitor electrical connector
The spark plug wires (four each side), into their original positions by squeezing the tabs


CAUTION
The spark plug wires must be connected to their proper ignition coil terminal.

 
Top of Form 1
Bottom of Form 1

Mar 28, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Spark plugs replecement


I replaced my spark plugs just recently on our V-6, hope you have long thin hands. The plugs & coils on the front half are under the decorative cover. Remove with an allen wrench. Take off the coil & disconnect the wire connections (Note: these coils are fro the front and rear plugs, that way you do not have rear coils to remove, thank god). Pull out the plug wire cap, use the cap not the wire, its easy on the front.....the back half gets fun. Use an extension on your plug removal socket and take out he plug. Replace the plug and put it all back, repoeat for the front three. The back three are located behind the intake manifold, gonna have to do a lot of feeling and reaching around the intake. Again remember pull on the cap not the wire, if you pull the wire out.........gonna have to get new ones. The left most rear plug was the hardest for me to reach lots of stuff in the way, A few choie words and some beer and after a while I got it. Have fun every thing went well after I got it out.

Mar 16, 2009 | 2000 Toyota Sienna

1 Answer

I think fire order is wrong


no 1-3-5 should be the rear of engine , see pic .
71d6876.jpg
think you got it backwards , thats all .

J5

Jan 22, 2009 | 1995 Chevrolet Camaro

1 Answer

1999 buick regal codep0305


Cylinder number 5 is misfiring. Check spark plug, spark plug wire and ignition coil for the number 5 cylinder. The number 5 cylinder is the closest to the front of the car on the drivers side. With engine running in dark (at night) take a spray bottle of water and lightly mist spark plug wires and coil and look for arcing. Autozone will test coil for free.

Nov 30, 2008 | 1999 Buick Regal

2 Answers

Cylinder Layout V8 5.9 L Magnum Dodge


drivers side plugs from front of engine to rear are cylinder numbers 1...3...5...7
passenger side front to rear 2...4...6...8..
fiing order 1..8..4..3..6..5..7..2..

Sep 07, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Toyota Sienna Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...