Question about 2004 Ford Escape

1 Answer

2001 mitsubishi diamante doors automaticaly lock after unlocking

Wether using remote or key doors immediately lock after unlocking

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,336 Answers

So, it is the ford NO escape? Start by pulling all of the door lock switches, one at a time.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to diable immobiliser on a 1995 mitsibishi diamante


I refer to my friend on justanswer web site,a Mitsubishi expert will help you immediately,just insert all the car's data and your contact for updates.
thanks and Keep calm is the best on Fixya

Nov 25, 2014 | 1995 Mitsubishi Diamante

1 Answer

How to replace the door latch on a mitsubishi diamante 2001


plastic clip snaps on to the rod, when you unsnap it from the rod swivel it and pull rod out of the hole

Dec 28, 2013 | 2001 Mitsubishi Diamante

1 Answer

Immobilizer light will not go off when key inserted, Lock smith said my computer was not responding, Toyota wants to replace computer but that's 1200 bucks and I want to make sure that this will fix the...


YOU MUST HAVE MASTER KEY:
1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful
entry into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons, press the lock button by
itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once
indicating successful programming. If the door locks do not cycle, or cycle twice.
repeat steps A and B in step 6 as your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Close drivers door.

Sep 18, 2013 | 2001 Toyota Land Cruiser

1 Answer

Doors automatically lock sometimes while in motion other times after the engine has been shut off. Using the remote to unlock the doors results in the doors unlocking them immediately relocking.


it depend upon the program of the alarm system.the mitsubishi alarm system is programble or u can check the alarm system control under the steering column and check the central lock controller,the main actuator on the front driver side door

Feb 19, 2011 | 2005 Mitsubishi Galant

1 Answer

Door locks re-lock immediately after unlocking with key-less remote.


check remote for new batteries.. possible signal malfunction... or the remote locking button is sticking causing it to relock

Sep 21, 2009 | 1998 Mitsubishi Montero

1 Answer

The battery in my key fob for my 2004 Mitsubishi Diamante went flat. How do I reset it now that I have replaced the battery?


1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works

Aug 20, 2009 | Mitsubishi Diamante Cars & Trucks

1 Answer

The alarm wont go off not even when we start the car


You probably need to put the key in the drivers side door and turn it like you were unlocking the car. The remote unlock will not work for this.

Apr 16, 2009 | 2001 Mitsubishi Diamante

1 Answer

Doors unlock fine but relock too quickly to get in the car


usualy tis is caused by the door key cylender sensor switch beeing loose or damage espacilly if you have had a slim or a wire hanger in the door panel trying to unlock the doors if this is the problem it will also over time run your battery down its kinda like your holding the lock button down all the time

Apr 05, 2009 | 2004 Ford Escape

Not finding what you are looking for?
2004 Ford Escape Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...