Question about 1998 Ford Crown Victoria

2 Answers

Can i replace a fuel pump on a 1998 crown vic without dropping the tank?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Contributor
  • 1,326 Answers

Nope. Fuel pump is located inside the tank. Some vehicles (don't think the CV's one of them) will have an access in the rear of the trunk to do this procedure. you can look insude the trunk near the back seat and if its thre you will see an access hole about 6-8inches around an that will allow you to pull the pump but only a hand full of car makers have this option. Its not very common

Posted on Sep 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 548 Answers

No, if you think it is too difficult it isnt, just get a manual from the library or an autoparts store , and seriouslt make sure the tanks is low or empty and keep clear from sparks !!!

Posted on Sep 05, 2009

Testimonial: "thank you"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pump not working


need a diagram for a 2001 crown vic police interceptor on droping a fuel tank so i can replace the fuel pump !!

Nov 13, 2012 | 1997 Ford Crown Victoria

2 Answers

My 1992 crown vic is not getting any gas to the injectors i think its my fuel pump i dont know how to take the pump off wat can i do and how do i take the pump off


fuel pump is in the gas tank. Have to drop the gas tank. Make sure that u run all tghe gas out before u drop the tank. Also make sure that u mark how the old pump comes out and put back the same way so the float will work. Watch for the wires on the pump that u do not break any of them.

Mar 25, 2011 | 1992 Ford Crown Victoria

1 Answer

How to replace fuel pump 1999 crown vic


Almost all vehicles made the last 30 years ,need to remove the fuel tank to get the sending unit and or fuel pump out. Can not believe the thousands of people with that question!

May 03, 2010 | 1999 Ford Crown Victoria

1 Answer

How do i repalce a fuel pump in a 1983 ford crown vic? can i get to the tank from above or do i need to drop the tank?


There's no way to get to it through the top (unless you remove the rear seat and cut a hole where the center of the backrest is). You'll have to either drop the tank, or the rear axle.

Feb 26, 2010 | 1983 Ford Crown Victoria

1 Answer

Do you need to remove gas tank to change fuel pump on 99 crown vic the pump is on the front side of the tank and is held in with like 6 bolts also where is the wiring connector


YOU SHOULDNT HAVE TO DROP THE TANK REMOVE 6 BOLTS ON TOP OF FUEL PUMP MODULE.YOUR WIRING CONNECTOR IS ALSO ON TOP OF THE PUMP MODULE.

Sep 22, 2009 | 1999 Ford Crown Victoria

1 Answer

1998 ford crown vic sputters


I would try to replace your spark plugs, and spark plug wires, My 88 Vic did the same thing...now it runs like a champ....you could also try fuel injector cleaner.

Jun 12, 2009 | 1998 Ford Crown Victoria

4 Answers

My 99 Crown Vic acts like it isn't getting gas


check for clogged fuel filter first, usually the pump works or it dosen't, check and get back to me.

May 01, 2009 | 1988 Ford Crown Victoria

1 Answer

99 Crown Victoria fuel pump replacement


Use lots of wd40 on tank strap bolts. If they bigin to bind tighten them up and losen again to get rust out of threads. If you remove the straps, why not remove the fill neck and lower tank? Much easier to work that way!!!

Mar 28, 2009 | 1999 Ford Crown Victoria

1 Answer

1999 crown vic fuel pump location


fuel pumps in the gas tank are always mounted in the top of the tank

Feb 13, 2009 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1998 Ford Crown Victoria Logo

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...