Question about 1996 Oldsmobile Cutlass Ciera

1 Answer

How do you replace a tcc solanoid on a 94 olds ceira?

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,714 Answers

Remove axle and move the side cover on the transmission enough to replace the solenoid and secured the wires to the oil tube with plastic ties to reduce the likely hood of vibration breaking the wire at the **** connectors. Don't have to completely remove the cover or drop the sub-frame.

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 OLDS CUTLASS CEIRA I WANT TO DISABLE AUTO DOOR LOCKS WHEN CAR IS SHIFTED OUT OF PARK TO DRIVE ALL DOORS LOCK WANTING TO DISABLE THAT FROM HAPPENING


Look in the owner's manual, but probably need to find a wiring diagram and clip the wire that's sending the info from the shifter to the door locks.
GL,
Td

Oct 01, 2012 | 1994 Oldsmobile Cutlass Ciera

1 Answer

What is code 67 on 94 gmc safari van


code 67; cruse control - switch circuit problems or air conditioner AC pressure sensor - circuit problems or torque converter clutch (TCC) solenoid. this info looked up in my GM Code scanner book.

code 94; the only 94 i could find says it's a information flag (master enable relay circuit - intermittent fault).
hope this helps you out

Nov 12, 2011 | Cars & Trucks

1 Answer

How do i unplug the torque converter solenoid on a 1993 oldsmobile cutlass ceira with the 3.3 L engine


The TCC solenoid is located in the side cover of the transmission you gain access threw the left front wheel well area after removing the splash guard. There is a access ]cover that you remove and its located in the valve body. If you are going to all the trouble to unplug it then you should replace it they are inexpensive and not to difficult to replace once you gain access to them.

Mar 13, 2011 | 1993 Oldsmobile Cutlass Ciera

2 Answers

I swapped a complete 3.3 out of a 92 cutlass ceira into my 94 grand am and now i dont get spark. are the crank shaft sensors the same?


there is nothing the same on the two the 1992 has computer command control system and 1994 has the OBD II system so none of the 1992 sensors or injectors will work with the 1994 on board computer system......SORRY

Jan 15, 2011 | 1992 Pontiac Grand Am

1 Answer

Shift problems 92 olds ceira shifts late and skips second.


Sounds like the transmission is on the way out try a flush see if that helps if not replace the transmission.

Jul 19, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

94 buick park ave runs great but with a light load it shakes, accelerates good and in park or neutral is smooth changed plugs and wires


Several possibilities having to do with the torque converter clutch and TCC solenoid:

1. Replace transmission fluid, use a synthetic Dex VI, do a complete flush with pan removal and filter replacement

2. Check all grounds related to the transmission control solenoids, clean them and ensure good electrical contact.

3. Rebuild transmission, the TCC friction material is worn out.

Sep 27, 2009 | 1994 Buick Park Avenue

1 Answer

2003chevy impala my trans clutch solanoid is not working how con it be repaired at home


This solenoid is underneath the vertical cover on the driver's side of the transmission. Since there are multiple solenoids under this cover, I suggest that you purchase the replacement solenoid prior to starting the job. That way, you will be able to identify the TCC solenoid from the others.
Once the side cover is off the transmission, remove the electrical harness from the solenoid. The solenoid is secured with a "bobby pin" style clip. Remove the clip and pull the solenoid straight out.
Charlie
PS I would suggest that you also purchase a transmission filter kit (filter and pan gasket). Drop the oil pan on the transmission, replace the oil filter which resides above the oil pan, clean the oil pan & it's magnet and reassemble.

Jun 15, 2009 | 2003 Chevrolet Impala

1 Answer

Transmission not shifting at high gear.


Tcc Solanoid Sticking, Torque Converter Clutch Solanoid located in side Pan of Transmission.
Try Flushing trans and servicing it first. Be carefull of Trans Shops they ALWAYS SAY You Need a NEW or yours REBUINT for a Meer $2500.00

Jan 20, 2009 | 2000 Dodge Avenger

Not finding what you are looking for?
1996 Oldsmobile Cutlass Ciera Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...