Question about 2000 Ford Expedition

1 Answer

Need a new air ride compressor for 1997 ford expedition

Need to have it installed and where can I go to have it done other then the ford dealership in charlotte north carolina or south carolina for an reasonable price? Or do you know of any used web auto sites that I can purchase it from and take it to the shop to have it installed? Having trouble please help!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Honestly, I would not replace the air suspension unless you use the vehicle in a manner which would require this. I have the same problem and I am going through strut masters website to purchase a kit which replaces with "coil" suspension. If you are handy you can do this yourself as it comes with complete instructions or you can take it to a mechanic and have them do it. It will be MUCH cheaper this way. WHen you go to their website you can order online or call and their technicians can help with the specific part you will need.

Posted on Sep 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Passenger side on 2003 ford expedition keep dropping no air leaks


On that system you have 3 ride height sensors. 2 front 1 rear. Disconnect the linkage arm and try to move sensor arm. Should move with little resistance but not loose. If bound up replace,also check 2 remaining sensors. Behind the passenger headlight is your compressor and relay. You can jump the 2 fat wires together at the relay to activate the compressor. The relay has 4 wires 2 fat 2 skinny. They sell a conversion kit to elinmate air ride and have coil struts and shocks. I normally recommend the conversion so the problem doesn't happen again. Nice system till it goes wrong

Mar 14, 2015 | 2003 Ford Expedition

2 Answers

How to replace height sensor on 1999 ford expedition


it is at the rear end and looks look a guide rail with a plug I would first try to clean the connector and apply carbon conductive grease/NOT LITHIUM==OR DIELECTRIC THERE THE WRONG STUFF/and see if it responds it's only been there for 161/2 years braving winter after winter and its either still good or done from a lack of attention needed taking it out and really cleaning just might save some$$$$$

Mar 05, 2015 | 1999 Ford Expedition

1 Answer

Back end of my 2001 Ford Expedition FWD, Eddie Bauer, was dragging. Had diagnostic test run and found out it needed a new air ride compressor. Had compressor installed, but compressor continues to run...


The compressor should only run until the rear suspension reaches the desired height. If it continues to run after the suspension has raised to ride height then you may have a leaking air bag/solenoid or line. If you dont have any leaks it is possible the EVO(air suspension module} or relay is at fault.

Nov 14, 2010 | 2001 Ford Expedition

2 Answers

I need a diagram of the air ride suspension on a 1997 ford expedition


the best thing for you to do is stop by your local ford dealership in the parts department and they be able to print you off the pictures and diagrams you need because i look in my 1997 to-2003 Expedition Haynes auto repair manual and there is nothing on the air ride so stop by your Ford dealership and you be able to get it wish you the best of luck Michigan Man.

Dec 12, 2009 | 1997 Ford Expedition

1 Answer

Air ride suspension 1997 ford expedition


If the compressor is working and actually pumping out air, might need to check your lines dont have a leak by disconnecting them from the bags. If pressured air is making it to the end of the line, then bags may need to be inspected and one or both replaced. However it is more likely that the lines are leaking or the compressor pump needs a service. Just a new set of rings in the unit. Good luck, hope it helps.

Dec 29, 2008 | 2001 Ford Expedition

1 Answer

Rear Suspension 2002 Ford Expedition


they make aftermarket spring kits for air ride removal. you can also get used parts from an expedition without air ride. My personal opinion there isn't a great difference in ride quality the only advantage the air ride has is that it will raise the vehicle ground height when in 4x4

Nov 25, 2008 | 2002 Ford Expedition

1 Answer

1997 expedition 2 wheel drive air suspension problem


There are ride height sensors in the rear that send a signal to the ride height/load leveling control module, one of these ,may be defective. Have Ford dealer run an active test of the system, they will find out what the part is that has failed, otherwise you are guessing, that equals wasted $$$

Nov 04, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...