Question about 1995 Jeep Wrangler

1 Answer

1995 jeep wrangler with a 4.0 liter motor. The

1995 jeep wrangler with a 4.0 liter motor. The car will not start. It spins over but doesnt start. It has voltage to the coil. Coil was replace and the magnetic pickup in the distributor replaced but still no voltage to the plugs. Sooo why wont it start?

Posted by on

  • 15341 Sep 05, 2009

    There is no module that I can find and the parts stores dont list one. Ive tried a new pickup in tha distributor and a new coil.

  • 15341 Sep 06, 2009

    Ignition wires are new Cap and rotor are new ciol and magnetic pickup are new

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 4,535 Answers

R ur plug wires healthy-they wear from heat n voltage-pull on um n inspec-u can hav ignition module tested @zone along with a code scan

Posted on Sep 05, 2009

  • Arnie Burke
    Arnie Burke Sep 07, 2009

    u need to hav your ignition module tested and your car scanned for data stream readout-do this for free at discount auto or A zone























































×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 jeep wrangler. 4 cl.2.5. Anyway its leaking underneath looks like lower hose has a hole afriend thinks it's my water pump i just see water coming down looks like from the clamp


Your friend is probably correct. The pump has a "weep hole" that leaks when the seals have failed. If tightening the clamp does nothing, replace the pump.

May 21, 2010 | 1995 Jeep Wrangler

1 Answer

I have a 95 jeep wrangler the 4 wheel drive will not engage into 4 high or 4 low when you put the shiftter into the postion if feels like it goes in but does not engage and the light does not turn on...


My Wrangler had the same problem, it ended up being a vaccum leak on the front axle shift motor. It is located in the middle of the front passemger side axle tube.

Feb 22, 2010 | 1995 Jeep Wrangler

1 Answer

Wiper will not work on 95 jeep wrangler? What to


start with fuse then switch and the motor

Dec 19, 2009 | 1995 Jeep Wrangler

2 Answers

4 wheel drive doesnt work.


Has this Jeep been modified at all?
It sounds like the shifter cable was reinstalled backwards.
Specifically the 4-Low "Not Climbing Well". 4-Low should give you the best torque and hill climbing ability.
Do you feel any "Binding" in the steering wheel (difficult to turn)?
Remember a Jeep uses real driveshafts and differentials to give you 4WD - you cannot engage 4WD or 4-Low on dry hard surfaces. It needs a little bit of slip between the wheels for turns.
Check you're fluids too.

Jul 11, 2009 | 1992 Jeep Wrangler

1 Answer

4 cyl. won't start,new plugs, wires,cap,etc.


a crank sensor tells the coil to fire.are you getting a signal at the coil to fire?

May 25, 2009 | 1995 Jeep Wrangler

1 Answer

1998 Jeep Wrangler 2.5 liter motor timing specs?


you could have vacumm problems making it seem like the timing is off, but the other guys are right on the timing!!!! it could be throw-body problems, like crack manifold problems. This year has thhis type of problem sometime. Try spraying WD-40 around the vacuum hoses, & manifold to see if the motor changes rpm????

Feb 09, 2009 | 1998 Jeep Wrangler

1 Answer

1995 jeep wrangler


the timing is adjusted by looseing the distributer bolts and you turn the whole distributerlighty in either direction while watching your timing marks on the crank shaft till you match up the marks

Oct 15, 2008 | 1995 Jeep Wrangler

1 Answer

1995 Jeep Wrangler YJ


a right angle pipe coming out from the top of the valve cover with a rubber hose attached. if you it out, shank it! it should sound like a mabble inside of it.

Oct 14, 2008 | 1995 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...