1998 ford explorer,can't loak doors by panel button or with my key less entry or with my wirless key button, buti can unlock th doors. Only way I can lock my doors is manually or with the button at the back
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On your 99 model the module is located behind the left quarter trim panel,mid-way.You maybe able to see it by removing the speaker cover or the cupholder on top. The module will have a sticker with a 5 digit code.
On the 04 the model is behind the right quarter trim panel toward the front about even with the right rear door stricker.
No you can not retrieve the keyless entry code with the vin number. However you may be able to retrieve the actual key code and have a blank cut. The only problem is your vehicle is a 98 model and that is the cut off on how far back ford goes so yours may or may not be avaliable. You can have your local dealer retrieve this but they would have to have a picture ID and proof of ownership.
The only other option is to have someone use a jocklock to get it open, it is pretty easy to do on this vehicle.
the quickest way is to go to a ford/mercury dealer and give them the vin # they will be able to look it up on the computer and give you the code. you will have to have your registration to prove that you are the owner of the vehicle. they will do this for no charge.
one of your door pins are stuck . they are mounted inside the doors , they are attached to the latch plates. the trick is which one is bad .most times its the drivers side but not always.
good luck chris