Question about 1997 Volkswagen Jetta

Open Question

Thw turn signal stopped working altogether after I unplugged and reinstalled the 3 prong relay on the fuse panel. All of the fuses are good. Any ideas as to where to look? I replaced the switch even but since I bought it used, it could be part of the problem now when it wasn't before.

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Location of turn signal relay 1981 Dodge 250 van

I think its in the near the fuse box, on mine I have to remove the glove box liner to access it, its a small round thing with either 2 or 3 prongs on it

Sep 23, 2016 | Dodge Cars & Trucks

1 Answer

1999 2.4l. Why don't turn signals and hazards flash?

Hi Shauna, do you know where to look for your hazard flasher relay ? If you still have the vehicles Owners Manuel it will be in there, If not you will need to find the Fuse panel under dash, There in the fuse panel will be a round, silver or even square object coming out of the fuse panel, It will have two prongs sticking out of when you pull it out, That is the Turn Signal/Hazard flasher relay, There also my be two of them in Fuse Panel. pull both out and replace there not very expensive.Hope this Helps, Good Luck Randy.

Aug 10, 2015 | 1999 Chrysler Cirrus

1 Answer

Where is the flasher relay

on the 94 coupe there are 2 relays. one is for the 4 way flashers and its mounted to the right of the fuse box. the fuse box is to the left under drivers side dash. the other flasher is for your turn signals, take off panel below steering column,and you will see a flasher relay located to the left and down from column. both flashers are silver and round with 3 prongs on them. good-day !

Jan 17, 2012 | 1994 Chevrolet Cavalier

1 Answer

Rear and front signal lights are not working but my hazzard lights do work its not the fusees they are all good?

  • Your hazards and turn signals are on a separate fuses and different relays. Check both fuses and both relays. Relays should be under the hood. The schematic will be on the underside of the lid. Relays look like a little black box with 3 prongs for the terminals. They just pull right out.

Regards, Tony

May 04, 2011 | GMC Jimmy Cars & Trucks

2 Answers

Turn signal relay keeps clicking (same sound as when turn signals are on) even when I am not signalling to turn. I checked, all bulbs/signals work properly. But the sound is annoying. I replaced the relay,...

it may not be that relay. if this happens when the vehicle is idling. look under the dash at the fuse panel. put your finger on each relay. you will feel it if it's the one that is clicking. replay the offending relay.

Jan 30, 2011 | 2000 Oldsmobile Bravada

1 Answer

Why would the turn signals stop working. All

replace your turn signal relay in the fuse panel

May 05, 2010 | 1983 Honda Prelude

2 Answers

I have a 1993 cadillac sedan deville cannot locate the flasher relay for turn signals.found relay for hazzards can you help?

The flsher shoul be plugged into the fuse panel. Turn on and listen. If turn signal is not working, The bulb is more likely the problem. Good luck.

Jun 09, 2009 | 1993 Cadillac DeVille

2 Answers

Turn signals dont work 97 Geo Metro

we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

Jan 22, 2009 | 1991 Geo Metro

Not finding what you are looking for?
1997 Volkswagen Jetta Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides