Question about 2000 GMC Jimmy

2 Answers

Turn signals and hazards don't work on 2000 jimmy

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same thing hapened in my 97 Blazer. What happens is the turn signal controller goes bad. Its only about a $40 at the dealership. Hope this helps!

Posted on Sep 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 436 Answers

You should try the flasher first, it is on passenger side by glove box

Posted on Sep 05, 2009

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 74945 Answers

SOURCE: where do i find the flasher on my 1995 gmc jimmy

the flasher is right below the radio,under the dash .it take 3or4 screws to take off panel.both flashers are under there.one for your 4 ways,and one for your turn signal.if your four ways work you can fill the flasher to determin which is witch. mine the four ways was on the left,turn signal on the right.they are not in the back of glove box.ther is apanel there with three relays but not for your turn signal.thank u gm jim.u helped me find them.

Posted on May 07, 2009

  • 173 Answers

SOURCE: need to replace hazard switch on 1995 gmc jimmy

HELLO ' first remove the bottom cover off by removing mounting screws then look on the bottom their is more little screws to remove the top cover tilt your down to give you more room to remove cover , hope this helps.

Posted on Sep 23, 2009

  • 15 Answers

SOURCE: 2000 gmc jimmy the turn signal relay keeps

i had the same thing happen. you need to replace the head light switch. The plastic where the headlight switch bank is just pry's open. it looks like you are removing half the dash but your not. the switch only comes out threw the back after you pop the plastic off and you open the clip and unplug the light switch. good luck i hope this helps

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't my turning signal blink/work


YOU MAY HAVE A DEFECTIVE HAZARD/TURN SIGNAL FLASHER/RELAY,

Jul 21, 2013 | 2000 Mercury Villager

1 Answer

2000 tacoma flashers don't work but turn sig do work!


The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

Brake lights stay on even if i pull fuse or take off brake light switch


Sounds like the turn signal switch is bad, since the brake light circuit is routed through the turn switch.

Feb 12, 2013 | 2000 GMC Jimmy

2 Answers

Flasher relay is clicking when signals are not in use?


Those are the typical symptoms of a problem with the mutifunction switch. The dielectric grease becomes impregnated with metal flakes, which jumps the contacts inside the switch. The clicking that you hear is the flasher relay located behind the glove compartment. Replacing the switch is not that hard for a DIYer. Some guys have remedied the problem by taking the switch apart, cleaning out the old grease, and applying new grease.
File In Section: Product Recalls
Bulletin No.: 01073A
Date: July, 2002
PRODUCT SAFETY RECALL
SUBJECT:
01073A - STOP LAMPS/HAZARD LAMPS INOPERATIVE
MODELS:
2000-2001 CHEVROLET BLAZER AND TRAILBLAZER (CLASSIC); GMC JIMMY AND ENVOY (CLASSIC); AND OLDSMOBILE BRAVADA (CLASSIC)
2002 CHEVROLET BLAZER; GMC JIMMY AND ENVOY (CLASSIC)
This bulletin cancels and replaces bulletin 01073, issued April, 2002. All copies of bulletin 01073 should be destroyed.
Due to parts availability, this recall was administered in two phases. This is the second and final phase of the recall. The Parts section has been revised to include parts for this second phase.

Jan 29, 2010 | 2000 GMC Jimmy

1 Answer

2000 GMC jimmy the flasher clicks when not using the turn signals or emergency lights it click for a few min an then stops and so on any ideas?


Could be the multifunction switch problem: http://www.automotix.net/autorepair/recalls/gmc-jimmy/

Summary: GENERAL MOTORS IS RECALLING 5,862 MY 2000-2002 CHEVROLET BLAZER, MY 2000-2001 GMC JIMMY, AND MY 2000 OLDSMOBILE BRAVADA SPORT UTILITY VEHICLES. THE MULTIFUNCTION SWITCH COULD DEVELOP AN OPEN CIRCUIT CONDITION THAT RESULTS IN THE STOP LAMPS AND THE REAR HAZARD LAMPS BECOMING INOPERATIVE. THE CENTER HIGH MOUNTED STOP LAMP AND TURN SIGNAL FUNCTIONS ARE NOT AFFECTED.

Dec 16, 2009 | 2000 GMC Jimmy

3 Answers

2000 gmc jimmy brake lights


I had the same problem with my 2001. I found it was the multi function switch. Better known as your turn signal switch. I found that the hazard switch portion of it had shorted. replacement is fairly easy, aftermarket part is available, much cheaper than GM.

Jul 15, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
2000 GMC Jimmy Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...