Question about 1998 Ford Expedition

1 Answer

1988 Ford Exppedition heater in the front will not work

1988 Ford Expedition heater in the front will not blow out heat, but the back heater works fine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,066 Answers

I ASSUME THIS IS A 98, THIS PROBLEM IS CAUSED BY A PART CALLED AN "AIR TEMPERATURE CONTROL BLEND DOOR ACTUATOR MOTOR" THIS MOVES A DOOR BETWEEN THE COLD AIR FROM THE AC AND THE HOT AIR FROM THE HEATER CORE, YOU WILL NEED TO REPLACE THAT ACTUATOR. .

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ford expedition no front heat, back heat work fine. I went through the glove box and into the side of the heater box, the blend door works fine. Any ideals?


if blend door works blower working check make sure you have enough coolant because suvs holds right much antifreeze.heater not working heater core plugged make sure both heater core hoses hot to touch if so problem could be temperature mode switch.

Jan 21, 2013 | 2000 Ford Expedition

1 Answer

My heat works great in the front but the rear vents only blow cold


The blend door actuator is located in the left rear quater panel. It's right there when you remove the trim panel (left side rear) Below is a picture of it when panel is removed along with another picture of the air duct system. I also gave you a picture of the connector at the actuator. Make sure you are geting power and test opening and closing. Worst case you could make the blend door stay to where you are geting heat until you can repair the problem...11_6_2012_12_34_03_am.jpg11_6_2012_12_34_21_am.jpg11_6_2012_12_34_35_am.jpg11_6_2012_12_34_48_am.jpg

Nov 05, 2012 | 1999 Ford Expedition

1 Answer

Have a 2004 ford expedition, heat will blow out rear vents but blows cold air out the front.


you need to have automatic ac and heater control checked out at a garage problem could be in the mode switch or electrical problem causing front blend door actuator not working properly.your vechicle has the EATC SYSTEM which is computer control need diagnostie equipment to fix.

Dec 11, 2011 | 2004 Ford Expedition

2 Answers

The heat dosent blow hot in the front but blows


have the front blend door and actuator inspected to see if operational.

Jan 09, 2010 | 2000 Ford Expedition

1 Answer

Front heat works, but rear blows cold air only


With your front heat working the most likely cause for the rear heat not to work is that there is an obstruction in the line that is preventing the warm coolant to get to the rear heater core or the rear heater core itself is plugged and not circulating. Another possible cause could be low coolant level where the system has enough coolant to provide the front system with enought warm coolant but not the rear system. Hope this helps

Dec 30, 2009 | 2004 Ford Expedition

1 Answer

99 Expedition blows cold in front but not in rear cabin. Heater will work in rear, but no A/C. Front A/C and heat is normal.


somewhere in the cabin there is a panel, behind it there will be a small vacuum valve that opens duct heat/cool for the back. I had it go bad in a windstar and stuck on heat, too lazy to replace so i'd pull panel and manually move it once or twice a year

Aug 15, 2009 | 1999 Ford Expedition

3 Answers

2004 Ford Expedition XLT, front blend door actuator


Hope I was avle to help, glad you up and going.

May 26, 2009 | 2004 Ford Expedition

1 Answer

No back heat in Expedition, Blows cold air but front works fine


Shelly,

Buy used parts at car-part.com. Look on page with * to find the cheapest part. Coud be your temp blend door (#2) may not be moving back and forth. Or, you are not getting hot water to the rear heater core.

3d53924.gif
You may have to crawl under the truck and feel the heater hoses to see if they are hot. You will find a group of 4 lines, 2 for heater and 2 for a/c. If hot, you know hot water is getting back to the heater core. If not, there may be a hot water vave that's not working. Not sure if EXP. has a water valve for rear.

Let us know what you you find. Good luck.

Feb 22, 2009 | 2000 Ford Expedition

1 Answer

Ford Expedition 2002 Front Heater blows cold air below 45 MPH


impeller is made of plastic on teh water pump and its slipping and spinning on the shaft renew before weather warms up as engine will overheat

Dec 31, 2008 | 2002 Ford Expedition

Not finding what you are looking for?
1998 Ford Expedition Logo

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...