Question about 1992 Acura Legend

Open Question

My ABS Light is not on but my ABS Motor Fuse always blows... my brakes works fine, but it does feel as if I have to step on the brakes harder to stop. If I had to stop real quickly to avoid an accident I probably won't be able to. I think it is related to the ABS Motor... why does it always blow when I replace the 50 AMP ABS Motor Fuse?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Ranger 10 amp fuse keeps blowing no brake lights,abs, turn signals?


Fuses blow because there is an overload on the system. If the fuse blows when you step on the brakes then there may be a short in the wiring from the brake light switch to the lights, abs module or turn signal switch. If the fuse blows when you turn the key on then there is likely a short in the wiring to the brake light switch. Basically you will need a wiring schematic to check the wires at the switch and at each of the loads. Also verify that the fuse is supposed to be a 10 amp fuse. Hope this helps

Mar 27, 2017 | Ford Cars & Trucks

1 Answer

Front brakes lock on after 20 mins of driving brake pedal gets harder when this happens brake warning light comes on but not always when this happens think it might be the abs


could be brake booster fault
http://www.newtonnet.co.uk/coupe/service/webtech/iindex.asp@id=12476

if abs warning light does come on on
part replacement may be required

if it is abs needs the diagnostic tools or visual check on the wheel sensors and abs unit

Oct 08, 2016 | 1989 Volvo 740

1 Answer

Abs light on in 2000 Alero 3.4


check fuses..If the fuse blows the light comes on and the ABS system is not working..Or possible the abs motor is shot. In any rate it is a good idea to look into it as soon as possible. You ABS system is not working. You still have brakes but the anti lock system that prevents skids will not work

Feb 12, 2015 | 2000 Oldsmobile Alero

2 Answers

Honda civic abs stays on


Just pull the abs fuse ,anything that disables the motor will
leave you with "old fashioned" brakes. No abs but base
brakes will be fine .ABS light will stay on .

Feb 16, 2013 | 2012 Honda Civic DX Sedan 1.8L 4-cyl....

1 Answer

Can I (safely) disable my 1999 Range Rover 4.6 ABS and Traction Control by removing the 5amp fuse, 30amp fuse, or ABS relay from the engine compartment fuse box? I don't want ABS or Traction control on for...


I have a 1998 Range Rover HSE. The ABS, TC amd Brake light stay on and now I have noticed that it is becoming harder and harder to stop. It literally feels like I dont have any brakes at all. I have to pretty much push the brake petal all the eay down in order to get it to stop. I had the pads and rotors about 6 months ago and I don't know what to do! Help please

Sep 30, 2010 | 1999 Land Rover Range Rover

2 Answers

ABS warning light What does this mean?


Means your anti locking brake system is disable, when the ABS light is on means the ASB computer pick up a bad signal from one of your ABS sensor's, any auto parts place like autozone can do a free code reading, once you get the code get back with us here at FixYa so we can help you diag. your trouble code, also your brake will work fine it be like a car with out ABS, get it check out.

Jun 03, 2010 | 2003 Honda CR-V

1 Answer

1996 Ford Windstar 3.8L, Brake light is on-brakes work fine


Abs light on means the ABS sytem has a fault.
You can determine what is wrong by counting the flashes (they say) and then put the data in on the web.

IE abs, windstar, failure, 3 flashes.

The brake light on is most likely picking up on uneven brake pressure, or a failing master cylinder/
You may not feel any difference yet, give it a little time, feel for a pedal fade at a light.

Jan 23, 2010 | 1996 Ford Windstar

3 Answers

Grand Cherokee 1999 - ABS light went on solid ?


Not necessarily but the Check and ABS are there to tell you something. Take me to the repair shop fairly soon and correct

Sep 29, 2009 | 1999 Jeep Grand Cherokee

2 Answers

When i brake at 50mph the vihicle shakes real bad It doesnt feel like warped rotors it feels like the abs is not working properly. Is there a quick fix like pulling the fuse for the anti lock system so i...


If your fuse box has a fuse for the ABS system, then you can pull it out and retest your vehicle. If shaking continues, have your tires and wheels properly balanced. Check tires for humps or deformations, better yet, ask if possible to borrow a couple of tires and rims (that fit your car) from someone that you know has no shaking problems and retest your vehicle. Warped rotors are the last thing to look at when problems like this arise, but are not uncommon.

Sep 25, 2009 | 2002 Ford E-Series

1 Answer

My abs lights on and my brakes hit the floor. then heater dies


check your anti lock brake system and your buster

Jan 05, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
1992 Acura Legend Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...