Question about 2004 Jeep Wrangler

2 Answers

2004 jeep wrangler won't start. No sound, no lights on the dashboard. the gauges jump once. What is causing that?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 166 Answers

Check your battery and battery cables. If there is corrosion on the battery terminals clean it off and make sure the cables have a good connection.

Posted on Sep 05, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

If there is no lights on the dashboard and no sound etc..the first thing you need to check is your battery..It may be a fuse as well somewhere...

Posted on Sep 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 jeep wrangler when i turn lights on beeping starts


did you RTM read the operators guide yet,
it tells you why all beeps beep and what lamps flash, (warning) and why. did you?
you turn on, the head lights, (what about 1st click , parking lights"?)
and does the dash cluster, show warnings of any kind?

if a door is ajar the system will think, you are exiting veh. with lights on and tell you, buy beeping ,etc.
but on my jeep it says on the dash DOOR, or on EVICs, (not yours)
the newer car even tells what door IS AJAR.
mine on shows , "DOOR"
the operator guide will say, check all doors for ajar, and get warning clear before driving....etc.

if you lost the guide here it is for free

http://justgivemethedamnmanual.com/jeep/jeep-wrangler-owners-manuals/

click the 05 link
ignore beeps, there are just too many .. i look at the cluster and learn to read it..
my newer jeep 08 can produce 1000s of errors,,,,, possible.
in fact the intent it to beep to tell the driver to look at the cluster
for in depth, causes.
see chapter starting on page 136'

once sound it makes is Check gauges chime. so check them.
and headlamps left on
and door ajar.

page 63
NOTE: If the driver's door is left open, and the headlights
or parking lights are left on, the "High Beam
Indicator Light" will flash and a chime will sound.
Lights-On Reminder
If the headlights or parking lights are on after the ignition
is turned off, a chime will sound when the driver's door

its a crude system, and evolved to complex in 2007.
"DOOR" or RF-door , on mine.
or

NOTE: A tone will chime if the turn signals are left on
for more than 1 mile (2 km).

search manual for
"chime will sound"

Mar 21, 2014 | 2005 Jeep Wrangler

1 Answer

Dodge intrepid 2004 showing code p1687, check engine came on and air bag light, speed ometer and tack gauge dropped to zero but started working 5 seconds later light is still on and showing this code. Can...


the lamps all change at engine stall , did it stall.
at about 300 rpm all engines (gas) stall, and the ECU changes state.
all cars.
does car run, ok, drive ok ,start ok, and sound ok? just a clue here.

Sep 25, 2013 | 2004 Jeep Wrangler

1 Answer

2001 jeep wrangler. Brake lights won't work but


Check the brake control switch situated just above the break pedal arm under the dashboard. Could be a wire loose or unplugged or the switch itself could be faulty

Mar 07, 2013 | Cars & Trucks

1 Answer

2003 Jeep Wrangler alarm sounds in cab but no indicator lights flash


The beeping alarm would be for leaving the key in the ignition or the lights on. Maybe a gauge that had dropped to zero.
Let us know if it happens again and what the conditions are.

Aug 13, 2012 | 2003 Jeep Wrangler

1 Answer

It won't start up and when i turn the key, it makes no noise, just all the lights turn up on the dashboard!! I need tips how to fix it!


It sounds as if the battery is almost without a charge. The lights will work in this case but there is not enough power to turn the starter. Can you obtain a jump from another car? If the battery is too low, the jump might not work. Remove the battery abd have it tested at Autozone or another auto parts store.

May 15, 2011 | 2004 Jeep Grand Cherokee

1 Answer

When turning key on will not start all the time all gauges and radio work 2004 jeep wrangler


Have you checked your ignition coil and starter? If you have good battery and you can hear the starter turning but the engine itself wont turn over than you have a possible frozen engine? Check the block to see if it cracked? Check to see if you have an oil leak from the head gasket? Also if it has overheated this will also cause the engine head gasket to blow and seize up.

May 15, 2011 | 2004 Jeep Wrangler

1 Answer

On my 2002 Jeep Wrangler Sahara M/T My


Try taking the gauge cluster out and cleaning the connectors then apply some dielectric grease. this may help with the speedometer. to remove the gauge cluster, pop off the top vent cover (3 clips), then remove the knee guard under the steering wheel. After that you will see two screws holding down the bottom part of the gauge cluster and 2 more on the top. Hopes this helps!

Feb 26, 2010 | 2002 Jeep Wrangler

1 Answer

Check Gauges Light 1997 Jeep Wrangler


bad battery or bad,corroded terminals

Oct 15, 2009 | 1998 Jeep Wrangler

1 Answer

My 2004 Wrangler won't start and the dash board is


check your battery for proper voltage (12.5 or greater)
Battery terminals if corroded. Replace/clean if necessary. Hopefully this helps

Aug 16, 2009 | 2004 Jeep Wrangler

3 Answers

OIL GAUGE GOES DOWN AT STOPS


I had the same problem with my 97 Wrangler 4.0..Change your antifreeze, replace with some new 50/50 mix...Also chanke your oil, replace the filter with a mopar filter and use stratght 30 weight motor oil...Solved my problem

Jun 24, 2009 | 1997 Jeep Wrangler

Not finding what you are looking for?
2004 Jeep Wrangler Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...