Question about Chevrolet Suburban 1500

Open Question

Constant blinker sound 2000 chevy suburban

Constant bliinker sound 2000 chevy suburban even when signals or hazzards are not in use

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep turn signals buzz


shorted turn signal lines.
hazzard fails and both left and right,
wiggle the haz switch, a few times, they can get dirty. from non use.
if all are dead, then bad blinker module.
read the manual? its all here
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Feb 05, 2014 | 1996 Jeep Grand Cherokee

1 Answer

I pushed the hazard light button and it push through and got stuck in the dash.so i pulled the fuse for them and they turned off so now i cant use my turn signals,is there a way to turn off the hazzards...


remove hazzard switch from dash, and unplug wires from switch, keep wires from touching each other w/ tape. blinkers should work. change out hazzard switch w/ new switch.

Sep 09, 2012 | 2000 Oldsmobile Alero

1 Answer

I have a 1991 mazda 323 and the right front and rear blinker does not work however the leaft blinker does


When you turn on the right blinker does the indicator light come on? It could be a faulty turn signal switch. The turn signals are routed through the hazzard switch, sometimes you can switch on and off the hazzard switch several times and the turn signals could start working again...Hey it's worth a try..

Mar 15, 2011 | 1991 Mazda 323

1 Answer

I have a ticking like a blinker sound ticking inside my vehicle.. it sounds like a continuous blinker going. All my out side lights flashers blinkers are working .What could this be?


look for the hazzard /4 ways switch. see if this is where this ticking is coming from. if so slowly move the turn signal switch . if it stops or changes, you have a bad turn signal switch. the hazzard and the turn signals operate through the hazzard switch..it has a built in relay.hope this was helpful

Feb 28, 2011 | 2005 Pontiac Grand Am

1 Answer

Blinkers don't work but hazzards still work????


THER IS TWO FLASHERS IN YOUR TRUCK,ONE FOR THE HAZZARD AND ONE FOR THE TURN SIGALS.YOU NEED A NEW TURN SIGNAL FLASHER,CHECK YOUR FUSES FIRST TO VERIFY.

Oct 17, 2009 | 2000 Jeep Cherokee

1 Answer

Hazzards and blinkers stoped working 2000 dodge strtatus


Relay switch behind steering wheel needs to be replaced. YOu must get it from the dealership or you will blow a fuse with the generic brands from auto part store. Had this happen to me, its about 30 dollars

Jun 01, 2009 | 2000 Dodge Stratus

1 Answer

Clicking noise from the blinker wont turn off!


There are 2 common things that cause this.
1. the hazzard flasher is faulty. the hazzard button and the turn signal flasher are all in one. Sometimes pushing the hazzard button in slightly will get the noise to happen, and is an indication it is faulty.
2. The turn signal switch in the steering column is bad. Turning the turn signal from left to right- very fast and harshly, will sometimes clear it up for awhile.
Tech JK
--------------

Jan 21, 2009 | 2004 Pontiac Grand Am

2 Answers

Blown fuse in turn signal and hazards


Sounds like you have a Direct Short inside the Sterring Column. If you Tilt the Wheel you should get almost the Same Result. Not an easy fix, You will have to Pull the Steering wheel and Replace the Turn Signal Unit.

Jan 15, 2009 | 1989 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...