Question about 1997 Chevrolet Camaro

1 Answer

I took off the belt of my 97 camaro and i cant put it back on

Posted by on



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Chevrolet Expert
  • 332 Answers

This should be easy one side of the belt has groove the otherside is smooth some of the pullies have grooves and some are just smooth start at the bottom biggest pully and proceed to the next one up,I`m assuming the bottom pulley is either in the middle or the left side at bottom if the next pulley up is toward the middle then depending on weather its smooth or has ridges will determine which side the belt will go around. then proceed to i assume the top pulley the belt should be out and around that one then across and over the right top side then down to the inside like the otherside and finally out and around the bottom right one .I hope this has helped you.

Posted on Sep 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cant put serpintine belt on

You don't take anything off

You just put a long 1/2" ratchet in the hole on
the tensioner & Pull against the spring tension until
you have the belt over the final pulley

Oct 12, 2012 | 2000 Buick LeSabre

1 Answer

Transmission is stuck on camaro it wont fall

Did you unbolt the clutch from the flywheel, or unhook the throw-out bearing from the clutch assembly ?

Sep 03, 2012 | 1997 Chevrolet Camaro

1 Answer

Cant find fan relay on 97 camaro z28 missing the cover to under hood fuse block please help

Here is a link to the owner's manual at the GM site, it is a free pdf download. All the info in in the manual. Click HERE to go to the GM site.

Feb 17, 2012 | 1997 Chevrolet Camaro

2 Answers

Dont know how to tightin the belt on my 2002 chrysler srebring! got the new alt.... in, but cant tightin the belt back up,i took the belt off by taking off the alt.....bolts

Have you tried to start it yet?That may be all you need to do to get the tensioner to re-activate and get the proper tightness.Be quick though.Only a brief start,then check it to see if it is any better.

Nov 03, 2010 | 2002 Chrysler Sebring

1 Answer

Cold air intake 97 camaro v8

Hey - Glad you're doing a power add on.
The short answer is no.

You can just disconnect the battery for 3-4 minutes.

When you hook the battery back up start and run the car normally. Maybe a 20 minute run ONE WAY to a friends house this will give the onboard computer time to adjust.

If the car isn't running well before you add the cold air and you put the cold air on right and hooked up ALL hoses then it will be right.
If you didn't purchase the CAI or Cold Air Intake - then you will need to check to be sure it was done right.

Best of luck with it.

Please vote me good if you like my answer.
If not post more on it and we can work out any other problems.

Mar 21, 2010 | 1997 Chevrolet Camaro

2 Answers

My serpentine belt came off and i need to find the tensioner pulley to put the belt back on. 2000 chevy camaro 3.8L v6

there is a pullry near the center with a half inch drive rachet wrench will fit in push down to relieve presure

Oct 08, 2009 | 2000 Chevrolet Camaro

1 Answer

Serpentine belt

when they build a motor without a/c they sometimes move the drive components around.  Use a bit of string the measure the size needed and see if the belt matches up.  Why don't you want the a/c to work?

Mar 22, 2009 | 1997 Chevrolet Camaro

1 Answer

Install seat belt through seat belt guide 1990 camaro

The new seat belt guides will have a **** in them that allows you to put the belt through it. If it's a used guide taken off another car it may not have the ****.

Mar 16, 2009 | 1990 Chevrolet Camaro

Not finding what you are looking for?
1997 Chevrolet Camaro Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides