Question about 2005 Mazda 3

Open Question

How to replace bulbs of switch fans light of mazda3 sp23

How to replace bulbs of switch fans light of mazda3 auto hatchback sp23 2005 model

Posted by on

  • jerry emmons May 11, 2010

    They're built into a single unit and you'll need to replace the whole unit.



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What model year transmission is compatible with a 2005 Mazda 3 sport

From Wikipedia.. "The Mazda3 or Mazda 3 (known as the Mazda Axela in Japan) is a compact car manufactured in Japan by the Mazda Motor Corporation. It was introduced in 2003 as a 2004 model, replacing the Familia/323/Proteg?. A performance-oriented version of the Mazda3 is marketed as the Mazdaspeed3 in North America, Mazdaspeed Axela in Japan and the Mazda3 MPS in Europe.
A second generation Mazda3 for the 2010 model year was unveiled in late 2008, with the sedan premiering at the Los Angeles Auto Show and the hatchback at the Bologna Auto Show. For the 2012 model year, Mazda began offering the Mazda3 with their newly developed SkyActiv technology, including a more rigid body, a new direct injection engine, and a new 6-speed transmission.[6]
The current third generation was introduced in mid-2013 as a 2014 model." My guess is the transmission from 2004 to 2009 mike be cross compatible. I would go to Autozone and ask or call the parts department at department at a local Madza dealer.

Apr 04, 2015 | 2005 Mazda 3

1 Answer mazda3 2005 2.0 did not cone with a manual. second hand buy.if I look for radio code problems everyone keeps on saying to put in a new code after using the master code I should check the manual. I...

Take the Mazda straight to a Mazda dealership and they will solve your problem in no time. Or email Mazda corporation and they will email back with the instructions, like I did. We have a 2005 Mazda SP23.

Feb 17, 2015 | 2005 Mazda 3 2.0

1 Answer

Engine light comes out for few days and turns of for fews. unitl now that is the routine of my car. i have a mazda3 2007 model. the light goes on and off until the car stops running and i need to remove...

If I were you I would take the car to have the recorded error codes downloaded from the on-board diagnostics. You have a persistent error and the ECU is detecting this and switching on the Check Engine Light. The error might be minor but its effects might be damaging (low coolant for example is easy to fix but risks causing expensive damage if allowed to go untreated). The recorded error codes (DTCs) should provide much more information to make a diagnosis on the root cause of your car's problem.

Jul 29, 2011 | 2008 Mazda Mazda3 Hatchback

1 Answer

Replacing low beam bulb in a 2005 mazda3. How do clips work on the new bulb

Hi ,
The buld is retained by a light wire frame under a slight spring tension, a clear view would help but it's usually a slight push (th the front) and a small movement either left or right to release the srping tension. Don't handle the bulb (oil from skin contamination) and possible refer to owners handbook !
Good Luck

Dec 13, 2010 | 2005 Mazda 3

1 Answer

Hi one of my low lights needs replacing but i cant seem to find the right bulb. I got one off ebay but it wasnt the right size, and even they didnt know which one i need

you dont have an autoparts store around ur way you never waiste money like this unless you know for certain its what you need go to auto parts store ,autozone,pepboys.advance auto.napa etc..

Feb 07, 2010 | 2008 Mazda Mazda3 Hatchback

2 Answers

How to replace a front headlight bulb on a 2008 Mazda 3

for the most part you open the hood and turn the socket and the bulb come out if you have an autozone near you they will install it if you get the bulb from them and thats about any auto parts store

Dec 17, 2009 | 2008 Mazda MAZDASPEED MAZDA3

1 Answer

Plugged in a trailer and now brake lights and horn don't work

There definitely should be a fuse for your brake lights. It should be inside the car fuse box, but sometimes it'll be under the hood (very rare). There's also a switch above the brake pedal that turns your brake lights on. This switch may be faulty

Aug 25, 2009 | 2005 Mazda 3

4 Answers

Need a fuse chart

in the owners manual.

Mar 11, 2009 | 2005 Mazda 3

1 Answer

How do i remove the trim around hatchback in mazda mx3

If there are no Visible Screws, It will be held on By Plastic Clips. Just pull it off. Do Not worry if you Break a Couple of Clips, You can get new ones at any Auto Parts Store and they are Cheap.

Jan 25, 2009 | 2008 Mazda Mazda3 Hatchback

Not finding what you are looking for?
2005 Mazda 3 Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides