Question about 2000 Volvo S80

1 Answer

I got a volvo 2000 volvo s80. I got some tranny problems. Its slipping in all gears. tranny fluid is fresh. I disconected the speed sensor that connect to the transmission and it doesn't slip at all. I will try a new sensor but I was just wondering if anybody had this same problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Ihave the same problem, the engine started to act like it was skipping then the tranny just gave out any one find out what is the problem 2000 s 80

Posted on Sep 16, 2009

  • bunejug11368 Jan 04, 2010

    my 2000 s 80 had the same problem its a shift sensor that went bad then the tranny just gave up. it went into limp mode just so i could get it to a mechanic...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P 0733 code what does that mean


You could be more specific with the issue:
  • Transmission type (Manual/Automatic)?
  • How did this issue appear?
  • Does the car change gears normally?
Your car seems to be an automatic transmission model?
So the fault code is "Gear 3 Incorrect Ratio"

This means that you may have:
  • Low transmission fluid level or dirty transmission fluid
  • Faulty or dirty shift solenoids
  • Transmission mechanical problems
  • Transmission hydraulic control circuit issue

This link might be of interest (Volvo forums S80 tranny...):
Transmission Problems Volvo Forum Volvo Forums

Feb 14, 2015 | 2000 Volvo S80

1 Answer

Transmission


check the fluid level in the gear box. Too much and not enough will cause overheating. have a pressure test done on the gear box to check for internal problems . Change the transmission fluid. . Have the bands and clutches adjusted to ensure that they are not slipping. If you are pulling trailers /caravans then the weight and speed will be factors that overheat the transmission oil. Run fault codes to check for sensors solenoids and servo faults.

Dec 10, 2013 | Cars & Trucks

1 Answer

Volvo S80 Faul code 000C


Hi there:
Diagnostic trouble code (DTC) TCM-000C is stored if the control module detects that the vehicle speed and engine speed (RPM) signals do not correspond with the programmed values and that an "incorrect" gear is being used in relation to the calculated gear. This is because solenoid S2 is stuck in open or closed position.

Diagnostic Codes: 000C, 002A, 002B, P0733, P0734, P0756
Tests/Procedures:
1. Clear codes from the Transmission Control Module (TCM).
2. With fluid hot, check transmission fluid for quality and level.
3. Test drive the vehicle. Accelerate from 20-60 MPH when in geartronic mode, gear 4. While doing this, watch input and output speed sensors with a scan tool.
4. If the code returns, the transmission is slipping, and the input and output speed sensors are updating, the problem is internal to the transmission.
5. If transmission is replaced, test ATF for coolant contamination per TNN 43-48. Replace radiator if necessary.

Potential Causes: Transmission Mechanical Problem

Tech Tips:
TCM-002B 4th gear. Incorrect gear ratio. This code sets when the actual gear ratio deviates by more than 10% of what is programmed into the TCM.
TCM-002A 3rd gear. Incorrect gear ratio P0756 - TCM-000C - Shift solenoid S2, hydraulic malfunction If the transmission is replaced, be sure the mating surfaces between the engine and transmission are bare metal and clean. If not, the engine may not start after assembly.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 24, 2012 | 1999 Volvo S80

3 Answers

I have a 2001 vovlo s80 with the codes p1618 p0705 po733 how can i fix


PO705 is Transmission Range Sensor Circuit Malfunction. PO733 is Incorrect 3rd Gear Ration Information. P1618 means that the ECU and the TCM are not communicating properly. PO705 & PO733 can be related to P1618. Check the wiring going to the transmission. Look for a pinched wire from the car being put on a rack or possibly an accident you may have had recently. If you can find no problems with the wiring or connections then it is time to see a professional transmission expert. It may just be that the transmission has an internal problem.

Aug 13, 2011 | 2001 Volvo S80

1 Answer

My 1999 Volvo S80 is slipping between 2nd and 3rd gear. And sometimes when i pull off it revs high causing it to take off real slow.


Hate to be the bearer of bad news, but when your trans starts slipping, it is failing and will eventually not move the car at all-you need to drive it so that it doesn't slip, which means light on the gas, nursing it until you decide how to proceed. Make sure it is not low on fluid, since that'll hasten the ultimate failure-sorry, not a happy thing.

Jan 07, 2011 | 1999 Volvo S80

1 Answer

Tranny do not shift into third gear with a signal indicating tranny needing service


check the shift solenoid and the vehicle speed sensor with a voltmeter one is broken or malfunctioning

Sep 14, 2010 | 2000 Volvo S80

2 Answers

When the car is cold it drives .when gets hot the gear slippers


Have a repair shop do a transmission flush. This should clear up the problem if its your transmission!

Sep 21, 2009 | 2000 Volvo S80

1 Answer

2000 durango 4.7 v8 tranny slip or something. Plzz help!!!


First thing you want to do, is get all that additive stuff out of there & get new filter & proper fluid in there. Mopar ATF 4. then disconnect battery for minute or 2 & start fresh as far as storing trouble codes goes. Chrysler transmissions don't react well to improper fluids or additives. If it starts to act up again, or check engine light comes on, have it scanned for codes at Autozone, or Pep boys & see what codes if any, come up. Don't prolong any transmission problem, as it will only cost you more in the end, if you don't take care of it right away.

Apr 19, 2009 | 2000 Dodge Durango

1 Answer

1996 saturn sl1 transmission slips in 3 and 4 gears.


The fluid and speed sensor did not really do anything to solve your slipping problem. If it slipped before it could be that there are chips/breaks in the teeth on the gears or it could be that the clutch is not connecting when it gets into higher gears. May need a new tranny or clutch.

Mar 30, 2009 | 1996 Saturn SL

Not finding what you are looking for?
2000 Volvo S80 Logo

Related Topics:

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...