Question about 2004 Mazda 3

2 Answers

The belt on the right side of my mazda 3 just broke, where can I find which belt it is on a holiday weekend

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 855 Answers

Try an auto parts store in your area. Like a Pep Boys, Penn Jersey, Auto Zone, etc. If you still have it take the old belt even though it is broken. That way if they don't have a listing you may be able to match up something close enough to get by with till you get the proper one. After you get the proper one if that is the way you have to go save the temporary belt for an emergency. That way you never get stranded.

Posted on Sep 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 497 Answers

Good Luck. I think youre talking about youre serpentine belt, if theres a gas station witha oilchange shop connected to it, you could get one there, if its open, otherwised you could be screwed....How bigs youre belt? if its long enough, you can macgiver it until you get to someplace that has one.

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 mazda truck with the 2.3 change timing belt and will not start. All timing marks are inline. Is it possible to be 180 degrees off on the cam?? please help


I am showing a 2.5 engine in a Mazda truck, but its generally the same as a 2.3.
Its not supposed to be an interference engine, so no damage should have occured when the belt broke. Its possible the cam gear is 180 degrees off, but if the marks are lined up by the book it should be correct. Its very possible the marks are a few teeth off since the cam gear can move when the tensioner is released.
Checking compression on all 4 cylinders will tell you if the valves are in the right place.

Feb 21, 2015 | 1999 Mazda B2500

1 Answer

My 1999 mazda b2500 4 cylinder Timing belt broke while driving did warp the valves or mess something up


May not have being a mazda , remove the rocker cover and wind the cam shaft over by hand and see if all the valves close to the same level, if a valves bent it won, t come right up.

Dec 23, 2014 | Mazda Cars & Trucks

1 Answer

Serpentine belt broke on my 2003 mazda tribute


just loss of power to accessory's unless the timing belt jumped a tooth or more.

Jul 08, 2012 | 2003 Mazda Tribute

1 Answer

How do you replace the 2 serpentine belts on the 1995 mazda protige


First loose the Power steering Pump and push it down,then remove the belt(This is the first belt you have to remove,.
then loose the alternator that is located in the right side
behind the engine, then remove the belt(This is the second belt.

Jan 06, 2010 | 1995 Mazda Protege

1 Answer

Need diagram for timing belt for 1991 mazda


here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Aug 09, 2009 | 1991 Mazda Protege

1 Answer

2006 mazda 3 no compression


the timming belt or chain,doesnt have to be off the cogs to be ok,,,chains jump and belts shear,timming could be off and vlavles bent and not closing ,,this would cause no compression

Jul 05, 2009 | 2006 Mazda 3

2 Answers

How do you replace the seat belt latch for the drivers seat belt?


Unbolt it from the floor board and slid it out of the seat.

Jul 31, 2008 | 2002 Mazda Protege

2 Answers

2000 Mazda MPV


I NEED THE DIAGRAM FOR SERPENTINE BETL FOR MAZDA 2000 MPV

May 17, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
2004 Mazda 3 Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...