Question about 1993 Mazda 626

1 Answer

I have a 1993 Mazda 626 LX five speed, and my clutch pedal will not go back up. I have pumped it like for 10 minutes, and I can not get into gear. Please help.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

Have you checked the clutch master cylinder for fluid? First place I would look. If you don't know what it looks like, it will be next to the fire wall drivers side- looks like a brake master cylinder, but smaller. Just use plain brake fluid in it.

Posted on Sep 04, 2009

Testimonial: "This seems to have worked, but I do not know if it will be a temporary fix or not."

  • golfdude338 Sep 05, 2009

    Most likely temporary. You need to find out were the fluid went and get fixed, but in the mean time keep a good eye on the level- Glad we could help.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 mazda mx3 5 speed, will not go into gear when running. but,will when off.


clutch is not disengaging when pedal is pressed
no hydraulic fluid
slave cylinder leaking
clutch master cylinder failure
air in system
clutch cable broken
take it to a clutch and brake specialist shop
not a clutch problem

Dec 10, 2017 | Mazda MX-3 Cars & Trucks

1 Answer

2000 mazda 626 5 speed manual transmission is stuck in a gear and won't shift out


A clutch problem will not interfere with gear selection when the engine is off and the car stationary.

It does seem like you have a gearbox or gear linkage trouble.

Sep 16, 2017 | 2000 Mazda 626

1 Answer

My 1993 mazda 626 5 speed; the rpm's are going crazy and you can hear it in the engine; it also feels sluggish; any thoughts


Yes, your clutch has failed and is slipping.

Get it replaced. This requires
  • removal of the transmission
  • removal and resurfacing of the flywheel
  • replacement of the clutch place, pressure plate and release bearing
and 4-5 hours of labour.

Jan 04, 2011 | 1993 Mazda 626

1 Answer

How do i fix a clutch on a 89 mazda 626 lx


you have it replaced, or you replace it yourself. long involved procedure and you are going to need a repair manual which no one is going to print for you. so go buy yourself one on ebay for about 10 bucks.

Nov 22, 2010 | 1989 Mazda 626

2 Answers

WHY IS MY CAR JUMPING OUT OF FIFTH GEAR? I HAS BEEN RUNNING OKAY NO NOISE . 1993 MAZDA 626 5 SPEED 4 CYLINDERS


A synchronizer for 5th gear is bad,needs to be replaced,the transmission needs to be removed ,and repaired.

May 04, 2010 | 1993 Mazda 626

1 Answer

1993 mazda 626 LX 2.0L. Smelled burning smell for about 10 seconds, then overheating began. No heat coming from heater, and Charge light; all happen at same time. Also, rear light came on too. Thought it...


Sounds like you have burned a belt off the pulley for the alternator and water pump. Dont drive the car until you have verified the belt is intact and the water pump is turning. Something had to have caused it if it did, I would suspect water pump, alternator, or air conditioning compressor has siezed if your car is equipped with it.

Jan 05, 2010 | 1993 Mazda 626

2 Answers

Mazda 626 'HOLD' light after gear box oil seal was replaced


I have the same problem with my car I think its the torque converter clutch but you should visit a diagonestic machine just to find out

Dec 06, 2008 | 1998 Mazda 626

Not finding what you are looking for?
1993 Mazda 626 Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...