Question about 1994 Toyota Corolla

1 Answer

You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?

Posted by on

  • yadayada
    yadayada May 11, 2010

    they are clearly marked/

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,757 Answers

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Toyota Corolla. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/toyota/model/corolla/1994_toyota_corolla_timing_belt_diagram_marks.htm

Posted on Mar 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 Toyota corolla changed the timing belt tensioner. trying to set timing, all marks line up except camshaft dots, can't get them to face each other without throwing off all the other marks


If you removed the tensioner and didn't lock the cams and crank down then you have to re-time the engine. It sounds like you let the exhaust and intake cams move.

Remove the spark plugs, put a ratchet on the crank pulley, slowly rotate engine until the cams line up. Once the cams are lined up remove, the timing belt and bring the crank around to the timing mark. put belt back on and let the tensioner go. put plugs back in...see if it'll start.

Apr 05, 2017 | 1994 Toyota Corolla

1 Answer

Timing chain installation


1996-1999 Toyota Corolla valve timing:
It is very easy to install the timing belt on 1997 Toyota Corolla. Do the following:
- Mark the numbers 1,2 and 3 on the spark plug wires with permanent marker or nail polish and remain the 4th one unmarked. This is necessary so that you can easily remember the spark plug wires order later on their original position.
- Remove the spark plugs so that the engine can easily be rotated.
- Rotate the crankshaft clockwise to align the v- groove mark on the crankshaft pulley with the 0 mark on the timing belt cover. If these marks are aligned the piston is always on the Top Dead Position (TDC).
25502648-okm0ksuj3f3lm2ubjq0dkjux-5-0.jpg

- To replace the timing belt remove the crankshaft pulley, upper and lower timing covers.
- Temporarily screw in the crankshaft bolt in its place to rotate the crankshaft with the spanner and align the v- groove of lower crankshaft gear with the index mark on the oil pump cover as shown in the following diagram.
- Inspect the cam shaft mark through the small hole on the cam shaft sprocket. The punch mark should be exactly behind the hole on the cam shaft sprocket as shown in the following diagram.


25502648-okm0ksuj3f3lm2ubjq0dkjux-5-2.jpg
- Loosen the timing bearing bolt, press the bearing forcefully against the spring with some suitable tool and lock it there temporarily.
- Remove the timing belt.
- Remove the timing bearing.
- Replace the new timing belt and bearing with the original.
- Install in the reverse order of dis-assembly.
NOTE: NEVER PUT EXTRA FORCE ON TIMING BEARING TO ADJUST THE TIMING BELT TENSION. JUST LOOSEN THE TIMING BEARING BOLT AND THE SPRING ATTACHED TO IT WILL PULL THE BEARING IT SELF WITH THE PRESET TENSION TO ADJUST THE TIMING BELT.
Thank you for visiting Fixya.

Mar 02, 2015 | 1997 Toyota Corolla

1 Answer

How do i set timing on


Line up the cam shaft pulley mark with the mark on the head. Bring the crankshaft pulley timing mark to 0 and put the belt on.

Mar 22, 2014 | 1987 Toyota Corolla 2 Door

1 Answer

What to do if your cam is out of time


2.3 Liter distributorless engines the timing belt keeps the cam in time with crankshaft and the auxiliary shaft runs the oil pump line up marks to corresponding marks install belt. but there is a inspection hole on front of cover rotate crankshaft line up on tdc remove plug a dimple in gear should line up pointer if not rotate crankshaft 360 degrees check again no dimple belt has jumped from loose tensioner.

Nov 07, 2013 | 1994 Ford Ranger Supercab

1 Answer

TIMING BELT CRANKSHAFT MARKS


the marks are on the gears of the cams and crank shaft easy to see might have to cleah it off some line marks up in between dots and install tenson hope this helps.

Mar 14, 2013 | Cars & Trucks

1 Answer

I am trying to replace my timing belt on my 1992 Toyota Corolla [1.6 liter engine], but I cant figure out how to remove the gears the belt was on ,we already removed the belt because it broke .please give...


Why remove the gears? No need to. Just be sure they are clean of any belt residue. The gears are locked in the correct position for the shafts.
You need to rotate the gears to position the shafts (Crank and Cam) to the correct position before installing the belt. Follow the instructions that should have come with the belt. Usually need to line up some marks on the gears to marks on the engine case for the valve timing to work right.
Pull the spark plugs so you can turn the crankshaft easier (BY HAND ONLY) Mark the wires to reinstall correctly. I did this a long time ago. Seem to remember pointing the mark on one gear to the mark on the other gear. Use a straight edge to line up the two. Dont take this as gospel.
Good luck.

Jun 21, 2011 | 1992 Toyota Corolla

3 Answers

How to set timing when you relesh tensioner and it changes the alignment postion of pullies 2000 ford ranger 2.5 l


Here is the trick. Align marks. Put the timing belt on the crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how many teeth you are off at the cam shaft pulley. Count the teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt at cam shaft pulley.Rotate the belt two circles and check the marks. Repeate this procedure til after releasing the tensioner, and rotating the timing belt two full circles, the mars will be align.

Nov 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Rebuilded a 2.0 1986 inline 4 cyclinder dodge ram 50. Need to reset the cam shaft to the crankshaft for the timing. The cam shaft timing mark is 90 degrees and facing left of the crank shaft. What is the...


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com


http://www.2carpros.com/car_repair_information/year/1986/make/dodge/model/ram_50/1986_dodge_ram_50_timing_belt_diagram_marks.htm

Mar 03, 2010 | 1986 Dodge Ram 50

2 Answers

How to time a toyota corolla diesel 1994


The timing marks are on the car. Line up the dot on the cam pulleys with the line on the head. The Crank-shaft sprocket has a groove and the block has a dot to line up with. Make sure the crank-shaft is at TDC on the compression stroke, not the exhaust stroke. You can do this by removing the spark plug at the #1 piston, and inserting a wood dowel to feel for the top of the piston. It needs to be at the top, not the bottom.
No belt slack betwwen the cam pulleys...all slack should be at tensioner. Check the tension of the timing belt at a top point halfway between the two camshaft sprockets. The correct deflection is 4mm at 4.4 lbs. pressure (2 kg). If the tension is correct, tighten the idler pulley bolt to 27 ft. lbs. (37 Nm).
Let me know if you need any other tips.
Good luck!

Feb 11, 2010 | 1994 Toyota Corolla

2 Answers

1994 Volvo 940 Station Wagon timing belt


I hope you've solved the problem by now, but there are alignment marks on the crank shaft (top pulley), idler (lower side), and cam shaft (smaller, bottom pulley) which should be aligned with stationary marks on the timing belt rear cover.

The belt has marks that align with the aforementioned marks (lines). The double marks on the belt align with the camshaft marks and the single marks with the others.

Loosen the tensioner clamp (nut) to allow the spring loaded tensioner to press on the belt and retighten the nut.

Rotate the crank shaft (clockwise, probably two revolutions) and make sure the pulley marks realign to the marks on the cover (they don't have to realign with the marks on the belt).

Rotate the crank shaft a full revolution once the belt is on and check that alignment is preserved.

Periodically loosen and retension the tensioner nut (access through a hole in the cover) to ensure that tension is maintained as the belt relaxes.

Oct 25, 2008 | 1994 Volvo 940

Not finding what you are looking for?
1994 Toyota Corolla Logo

961 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...