Question about 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

My break lights won't work. thought it was a fuse

My break lights won't work. thought it was a fuse but, it wasn't. is it something electrical and i have to bring in?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

Look up above your brake pedal and you should see a switch that should look like a rectangle. Odds are this switch is broken and it is what tells your brake lights to come on when it depresses.

Posted on Sep 04, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,267 Answers

Check the brake pedal switch which when it gets pressed, swiches on the brake light. Also check the brake light bulbs..............sodeep

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda Accord keeps blowing fuse and won't start


Recently we had to put a new fuse in the starter ???????????? What fuse ? location , size . A fuse blowing means a electrical short to ground .

May 29, 2017 | 1998 Honda Accord

1 Answer

Power door locks won't work and the instrument pnnel lights won't turn on. I replaced blown fuse a 20mp one in position 14 I believe. worked ok till I tried to lock the doors, the fuse blew


Hello. Try looking at the black earth that goes from the drivers door and into the A frame which is covered in a rubber sheath. The wire can break after opening and shutting the door over several years and as it's normally the thicker wire is more prone to break. Also check the other wires visually for any chaffing and tugging on each wire. If more electrical parts start failing, air con blowers etc it will be an earth. Hope this helps

Nov 03, 2012 | 2002 Dodge Neon

1 Answer

When I hit the break peddle, the break lights won't come on


there is eather a swich under the dash that is out or there could be a fuse thats blown.

Sep 04, 2012 | 2004 Dodge Neon

1 Answer

Cigarette lighter ans accessour power point not working... it's not the fuse


I had a similar problem I thought it wasn't the fuse because I had only checked one but there are two cigarette fuses. Also you can replace the whole cigarette lighter if it is getting power to it. If it isn't there might be a bad wire leading to it. Get a test light to see if it's getting power through the fuses hole.

Aug 12, 2012 | 2001 Chevrolet Impala

1 Answer

My 1997 328is computer always says to check brake light failure when I first put on breaks after starting to drive the car, but all break lights are working! I had this check at BMW and surprisingly told...


I have the same Problem... same year , model..
what I noticed with mine was.. My right rear Light cluster is not as 'bright' as the Left side... and I think thats whats triggering the msg.. When I pulled the bulbs out.. (one in particular) the Metal contacts inside the socket, were corroded and half of it looked 'dissolved' from corrosion .. Havent remedied it yet.. may have to replace the whole light assembly... but, thought I'd mention it to you as a place to start.. / look.. G'luck ! g

Sep 04, 2011 | 1997 BMW 328

1 Answer

I have an 05 H2 and the headlights won't turn off when the truck is OFF. I have full headlight control when the key is in the ignition & turned. I have checked all relays and fuses and they are...


Hmm, thats verry interesting, sounds like there is a short somewhere. You should check the switch, and all the wiring. I bet it's the switch though.

Aug 04, 2011 | 2005 Hummer H2

1 Answer

The E-break light won't illuminate on my '81 F-150 when the E-break is applied. all the fuses have been tested and are good, and even further, when you turn the key in the ignition, the E-break...


This would depend on the model but most would have the switch at the end of the pedal or at the bottom of the hand brake. Normally behind the firewall or at the dash or beneath the console for those who have the hand brakes.

Jul 04, 2011 | Ford F-150 Cars & Trucks

2 Answers

I have a 2000 Ford Excursion. I went to hook up a


If these lights still work on your excursion then it is probably not a fuse problem. It sounds like it is a loose pin(s) with the trailer plug or a loose electrical connection(s) on the trailer or maybe the bulbs on the trailer are burned out. This should help, if not then contact me again at FixYa and I will be glad to help.

Jun 20, 2010 | 2000 Ford Excursion

1 Answer

All of a sudden several electrical issues


CHECK ALL THE FUSES UNDER THE DASH AND UNDER THE HOOD OF THE CAR FOR THE DOOR LOCK ISSUE
THE BREAK LIGHT ALWAYS ON , THERE IS A SWITCH UNDER THE EMERGENCY BREAK HANDLE THAT SOUNDS LIKE IT JUST NEEDS ADJUSTING

Sep 16, 2009 | 2001 Honda Civic

1 Answer

1995 ford mustang break lights do not work.


get a manuel from an auto parts store. in this manuel it will have etm(electrical troubleshooting manuel) it shows the brake lights and wires colors of wires. trace the wire color from the fuse using the diagram. purchase a test light from wal mart to see if your wire has power. if it does there may be a bad connection or component but hte etm shoud show you what components are on the circuit.any questions email me at jacobtaylor3@yahoo.com

Dec 31, 2008 | 1995 Ford Mustang

Not finding what you are looking for?
2007 Dodge Caliber SXT Sport Hatchback Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...