Question about 2004 Saturn VUE

1 Answer

Will not go all the way in to reverse grinds and

2004 vue will not go all the way in to reverse grinds and pops out

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Saturn Master
  • 1,564 Answers

This could be due to several causes. I would start by making sure that the throwout arm on the tranny is being relaxed entirely when the clutch pedal is at rest. Also have someone else watch the action of the throwout lever (sticking out of the bell housing) and make sure you have around one inch of throw(movement) at that point.You might also find that there is an available adjustment on the shifter linkage to allow it to go into reverse more smoothly. Good luck, Dana

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Saturn vue will reverse but no forward?


check the Shifter cables they break. You have to remove center console surround to make sure cables are still attached. Very common problem of eyelets breaking. The shifter should feel sloppy. If shifter feels tight, the transmission may be bad

Nov 14, 2016 | 2004 Saturn VUE

2 Answers

My 2004 vie will shift into gears but want move what can I try please help!


VUE will not move - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn Vue > Vue Tech

Jan 8, 2010 - 11 posts - ‎9 authors
The owner says it will not move and it is the transmission that needs to be replaced. Itwill start and run but when in gear it will not move. Is this a ... 99 SL1 Manual won't go into gear
6 posts
May 12, 2009
Car won't shift into drive...
8 posts
Nov 12, 2007
More results from www.saturnfans.com

Saturn Vue Transmission Problems - Car Forums at Edmunds.com

forums.edmunds.com > Saturn > Saturn VUE

Jan 26, 2013 - 30 posts - ‎17 authors
Learn more about Saturn VUE at the Edmunds.com Car Forums! ... miles and transmission is stuck i can feel it go into reverse and move ,but not for .... within a few weeks it started popping out of 3rd gear and makes a grinding noice, .... this bolt until I already had done so, now, it will not shift from 2nd to 3rd. More results from forums.edmunds.com

Nov 24, 2015 | 2004 Saturn VUE

1 Answer

2013 saturn vue grinding noise when i make turns


power steering pump low fluid or bad

Mar 04, 2014 | 2004 Saturn VUE

2 Answers

2004 saturn vue awd HELP!!


The RDM or Rear Differential Module on these GM vehicles (Vue, Torrent, Equinox) is a known weak point. It is most likely shot as the trans outputs power to the front and rear equally; gearotor pump(s) in the RDM then assign traction to each rear wheel if the wheel is turning slower than the input. So if it is still turning it must not be transmitting that torque to either "braked" rear wheel... There was a recall for the RDM in which GM quietly increased the slippage at which it engauged the rear wheels due to high failure rates...

Oct 03, 2009 | 2004 Saturn VUE

2 Answers

2nd, 4th, and reverse went out in my saturn, now stuck in 3rd, burning plastic smell?!?!?!


Your Vue could have several engine/trans configs; the GM 4-cylinder with 4 speed trans or VTi variable trans; all 2004-2007 V6 Vues' used a Honda drivetrain with very little issues. There were countless problems the the VTi transmission- my guess would be that's what you have and there were several recalls reguarding those issues; I would check with a dealer quickly...

Sep 24, 2009 | 2004 Saturn VUE

1 Answer

2004 Saturn VUE AWD V6 has a harsh grinding sound in front wheels


Have you checked your wheel bearings? When these go out you can get a harsh grinding noise. This sounds like that is what it might be. Does it happen when you are going fast/slow turning/going straight? I know you said it's inconsistent but the more info the better. However, if I had to bet, based on what you have already said, it's your wheel bearings. Let me know if you have further questions. Thanks for using FixYa!

Aug 01, 2009 | 2004 Saturn VUE

1 Answer

How do I repair a problem with the code p0742?


Hey marcarhernan

This code is set when there is a variance in speed from the transmission input and output shafts. It can be a simple sensor issue or a more complex internal problem. There are several recalls for VUE transmissions but I do not think yours falls under this problem. Yours sounds more like an internal belt issue which Saturn has a technical bulletin for as shown below. This usually requires replacement of the case cover and filter and sometimes the belt depending on the damage. This is the bulletin that has to do with your code;

Bulletin No.: 04-07-30-024E
Date: June 09, 2006
TECHNICAL
Subject:
No Movement in Drive or Reverse with or without DTC P0741, P0742, P0841, P1756, P1758, or P1882 (Replace Case Cover Assembly and Filter) Models:
2002 Saturn VUE - Retrofitted with a 2003 or 2004 VT25E (VTi) transaxle (RPO M16/M75)
2003-2004 Saturn ION
2003-2005 Saturn VUE
with VT25E (VTi) transaxle (RPO M16/M75)
Supercede:
This bulletin is being revised to add additional Correction information. Please discard Corporate Bulletin Number 04-07-30-024D (Section 07 - Transmission/Transaxle).
Condition
Some customers may comment on the vehicle not moving in the "D" (Drive) or "R" (Reverse) gear selection positions. In many cases, the transaxle will also produce an audible grind or whine noise when attempting to operate in drive or reverse. The Service Engine Soon (SES) telltale may be illuminated with DTCs P0741, P0742, P0841, P1756, P1758, or P1882 set.
Cause
This condition may occur when the VT25E transaxle belt has malfunctioned.

May 14, 2009 | 2002 Saturn VUE

Not finding what you are looking for?
2004 Saturn VUE Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...