Question about 2002 Mitsubishi Montero

Open Question

How do I flush the cooling system in a 2002 Mitsubish Montero LTD

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does my heater blow heat when I am running over 2k rpms?

Check the coolant level in the radiator. If the coolant gets low enough the heater is the first thing to stop working. If there is plenty of coolant and the temp gauge is get in up to the half way mark than it's possible the heater core is just about plugged up. Your local repair shop should be familiar with flushing the heater core. I have had many successful heater core flushes over the years and it can save you thousands. If the heater core is successfully flushed it may not be a bad idea to have the coolant flushed at the same time.

Nov 16, 2014 | 2002 Mitsubishi Montero Sport LTD

1 Answer

The horn on my mitsubish wont work, all the fuses work, whats the problem?

Probably the contacts in the steering wheel not making contact anymore.

Mar 29, 2013 | 2000 Mitsubishi Montero Sport

1 Answer

My 2002 Montero Sport continues to run hot

Make sure there is no air in the cooling system,and that the cooling fan is working,coming on,and going off on it`s own.if it is not ,replace the coolant sensor.

Jul 31, 2010 | 2002 Mitsubishi Montero Sport

1 Answer

What are the tappit settings for a mitsubish montero io GDI 2001 petrol

hi its ok ive found it no need for engine size i gather its a 3.5ltr, these should have hydraulic tappit's and therefore do not need adjusting, as you cannot adjust them, if however they are rattling you may either have blocked oil ducts in the engine, which will need to be flushed, or they are worn to the extent that they will need replacing, or check your oil level it might be to low and needs topping up, or even still the oil has got to thin and will need changing....hope this helps please vote thanks

May 30, 2010 | 2001 Mitsubishi Montero

1 Answer

I have a mitsubish montero and keep getting code 401 after putting in a new egr valve I have also replaced O2 sensors and cannot figure out why the code keeps coming up

make sure egr passage way from valve to intake not clogged and make sure exhaust to egr supply is present and make sure if valve is vacuum operated that senser is ok and vacuum supply correct if electial egr senser then intake probably clogged sense code 401 is insuffence egr flow

Mar 14, 2010 | 2002 Mitsubishi Montero Sport

1 Answer

Mitsubishi Montero 2002 Ltd Thermostat

Have you tried Googling 'Download 2002 Montero Manual'? I did it for my 94 and found a couple of download locations.

Jun 17, 2009 | Mitsubishi Montero Cars & Trucks

1 Answer

Rear Speaker in Montero Limited is bad

Item 21 (the upper interior trim piece) needs to be removed, prior to removing the bottom piece #22. The only screws that hold #21 in are at the handle at the top, then you just pop it out. There are about 6 screws on the bottom part.

Nov 18, 2008 | 2002 Mitsubishi Montero

Not finding what you are looking for?
2002 Mitsubishi Montero Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides