Question about 1995 Chevrolet Camaro

2 Answers

I Need to disable airbag for repair

I have to disable an repair the airbag or a 1996 Ford F-I150 whats the best way to do so

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

The discription of the car involved is mixed but the service is the same. With the battery disconnected wait 5 minutes then with the panel under the dash above the floorboard you'll see a brightly colored yellow wires with connecters un plug the connectors and if it has passenger side or side air bags it will have connectors on the passenger side too every airbag wii have a connector. If you turn the power back on with out hooking them back up the airbag warning light will be on and no airbag ( even ones that are connected will work if needed. Some models once the light is on the light will have to reset with a scanner and others will reset on their own if everything is hooked up and right.

Posted on Sep 04, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 26 Answers

Disconnect you're battery and give it a few hours or even a day, Just to be on the safe side.

Static electricity can set them off. that and there is a possibility that there are caps in there that store enough power to set it off. i have also heard that if there is power to it when u unplug it the arc will set em off.

"Position yourself off to the side while doing this. Safety note: During this entire procedure, ensure that the airbag module is pointing away from you. " Better safe then ?.............. You can fill in the rest. **** happens,

Posted on Sep 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Disable passenger airbag

There is no user operated key to disable passenger airbag like on most newer cars, for what you are attempting just disconnect the battery! This should allow you to remove the dash without activating the airbag!

Mar 06, 2014 | 1998 Ford Escort

1 Answer

What is the cause of the air bag light being on

When the airbag light, or SRS, light comes on it means that the airbag controller has detected a problem with something in the airbag system and has disabled the airbags. Usually this is due to a problem with and impact sensor on the vehicle. You'll need to take it to a shop and have it diagnosed and you should do so quickly because as long as that light is on, your airbags WILL NOT DEPLOY! Good luck.

Jan 27, 2014 | 1996 GMC Jimmy

1 Answer

Cavalier, how to disconect airbag light.


The airbag light is there for the purpose of warning you that your airbag system and your seatbelt pretensioners WILL NOT WORK in the event of an accident. The correct way to get the airbag light to go out and quit bothering you is to diagnose the malfunction with your supplemental restraint system and properly repair it.

To tell you how to "disconnect" or "disable" this warning system light would be taking your life into my hands with my advice. Sorry, I cannot do that. My advise is to get it properly diagnosed and repaired by a qualified service technician.


Mar 05, 2012 | 1996 Toyota Corolla

1 Answer

Taking the passenger side dash apart. cracked the front piece would like to try to push crack out. Looks like a couple bolts will this be an issue with the airbag?


I hope and prey you have the airbag disabled.. if not, unplug the positive terminal from the battery ((AND TIME IT - TEN MINUTES DO NOTHING AT ALL-- THE AIRBAG WILL DISABLE ITSELF AFTER ALL THE ELECTRICITY IS DRAINED OUT OF IT)) --So, until the airbag disables stay away from all of it!!!. Now, your sight is clearly more better than mine from here.,. take a real close look and full inspection, if you will, to be sure noting damaged the airbag or any of its components, if it is just the plastic dashboard, you should be fine.
Best regards
Please provide feedback

Oct 03, 2011 | 2005 Ford F-150

1 Answer

How can i reset my 1996 ford thunderbird airbag light...???

I need to find a vacuume diabrame for an 1996 ford thunderbird lx

May 19, 2010 | 1996 Ford Thunderbird LX

1 Answer

Where is the airbag diagnostic module on my 1996 aerostar? getting code 51

The code you have indicates that the internal fuse in the airbag control module has been blown; this happens automatically when a short to ground occurs in one of the airbag circuits in the vehicle. This is a safety feature designed to prevent injuries due to accidental deployment of the airbag due to an electrical fault; the module blows the fuse intentionally to disable the system. the fuse is not serviceable; a new airbag module must be installed after the short to ground has been located and repaired. The air bag diagnostic module is located at the center of the dash panel, below the integrated control panel

Nov 06, 2009 | 1996 Ford Aerostar Extended

1 Answer

Blinking airbag light

The blink code you are refering to is : Intermittent or Repaired RH Radiator Primary Crash Sensor Feed/Return Circuit Open , which means your right hand side frontal crash sensor (airbag sensor) is not working, therefore your airbag system is disabled...

May 08, 2009 | 2005 Ford Freestar

1 Answer

1996 Toyota Corolla

you will need to disconnect batt and wait 5 min,remove airbag fuse then pump brake pedal.this will depower the airbag system.then unplug the airbag you want to deactivate.hook batt back up,reinstall airbag fuse.with an airbag disconnected the airbag light will be on.
make sure you depower the airbag system before unpluging any airbag,or the airbag may deploy causing severe personal safe.

Oct 26, 2008 | 1996 Toyota Corolla

1 Answer

Disable passenger airbag

Ran into experienced Honda mechanic who simply detached wires in the proper places. No shop will touch this because of liability concerns. Later models might have more sophisticated back up.

Jun 12, 2008 | 1996 Honda Civic

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides