Question about 2004 Buick Rendezvous

1 Answer

"service tracking system goes on and off"

When imake sharp left or right turns,i can feel break pedal kicking back,and the yellow warning light says "service tracking system" about 5min.later it turns off.why is that? what shuld i do

Posted by on

  • theoens Dec 03, 2009

    say to service my tracking system when I start my car then goes off but the anti loc and track off lights remain on what does this mean



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

This is the automatic traction control system kicking it when going around corners. Vehicle may think tires are sliding around corners kicking in the traction control. If you don't like traction control, you should have a button to turn it off, or remove the fuse.

Posted on Sep 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

A warning light on my mini one diesel 2011. a yellow circle with capital (A) in centre

I think you mean the yellow circle with the triangle and the exclaimstion point? ... That would be a service light. If it says ABS in the center (orange warning light ln the right, not left) then your brake system needs inspected or serviced.

Aug 14, 2016 | Mini Cars & Trucks

1 Answer

Specifically I'm trying to identify the wire on the spark plug coil assembly to which I should connect the signal wire of a Tachometer to. The wire colours are, red, yellow, green/white, and blue.

It says the tachometer wire is Yellow/Green, you do not have that listed. You will find it in the list below, it is highlighted..



12V CONSTANT WIRE WHITE Ignition Harness

12V IGNITION WIRE GREEN Ignition Harness



POWER DOOR LOCK (-) WHITE Harness In Driver's Kick Panel

POWER DOOR UNLOCK (-) GREEN/RED Harness In Driver's Kick Panel


DOOR TRIGGER (-) PINK/BLACK In White Connector Behind Fuse Box

TRUNK TRIGGER (-) YELLOW/BLUE In White Connector Behind Fuse Box

TRUNK RELEASE (5-wire) LT.GREEN/YELLOW At Motor In Tail Gate

FACTORY ALARM ARM (-) Factory remote only

FACTORY ALARM DISARM (-) Factory remote only


BRAKE WIRE (+) WHITE/BLACK At Brake Pedal Switch

HORN TRIGGER (-) RED/GREEN Harness At Steering Column

LEFT FRONT WINDOW UP BLUE/RED At Driver Window Motor Inside Door

LEFT FRONT WINDOW DOWN BLUE At Driver Window Motor Inside Door

RIGHT FRONT WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

RIGHT FRONT WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

RIGHT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door
RIGHT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

Feb 07, 2016 | 2001 Subaru Legacy

1 Answer

My break pedal has gone solid an the warning light has come on there is plenty of fluid in it also a yellow warning light with what looks like a drip under it came on with the battery light

Very stiff pedal means brake booster isn't working. It's possible you have a master cylinder problem or just the brake booster. Battery light is separate issue,....
If you can, get the codes read from the computer and report back.

Jun 09, 2015 | Cars & Trucks

1 Answer

2007 GMC Canyon ABS Fault - Originally ABS Fault started when making a sharp right turn. (ABS Fault light only). Stopping and restarting would clear 'fault' until next hard right. Later, occasional metal...

id check your caliper to see if the piston is compressing all the way if not check your fluid it should be clean not brown or if you have been through large amounts of water if it has gotten into the brake system and check your bleeder valve to check if it has rotted or come lose or if you have a break in the lines or air, most likely your caliper is failing to compress.

Nov 05, 2013 | 2007 GMC Canyon Crew

1 Answer

Z24 nissan engine 720 kingcab sensor light is on.what sensor?

An orange or yellow light with just the word "sensor"? All '82-'87 models are equipped with a maintenance reminder light for the oxygen sensor. It is just an alert to have the O2 sensor checked. Light is set to come on at 30,000 miles, will need resetting, then will again come on at 60,000 miles, must be reset, will come on at 90,000 miles at which time Nissan says locate and disconnect warning light connector. Be done with it!

There are two methods to turn the light off, depending on model, year, and engine size and calibration. On the earlier systems (without a relay) the connection for the warning light is somewhere around the fuse box-wire colors are different for all models, so I can't help you there-you just disconnect the connector.
Later models may have a sensor relay. Relay is reset by depressing a button on the relay or by inserting a small screwdriver into the reset hole-depending on which kind of relay. Getting confused? Not done yet, so you may just want to find the warning light connector, unplug it and be done with it-you probably have more than 90K anyway, at which time it should be disconnected
But to continue: Now, you have to find the relay for resetting...Good luck on that!...I can tell you, though, that on pulsars and sentras, the relay is located either behind the left kick panel or the right kick panel, can be in either location, depending on model and year. Your pickup, if it has a relay, should have it also behind one of the kick panels.
But if you can find the warning light connector, 2 wires, just disconnect it. It might also be near the hood release handle.

Sep 30, 2013 | Nissan Cars & Trucks

2 Answers

2001 Carerra brake pushes back!

ABS Braking System being activated for some reason

Nov 26, 2012 | 2001 Porsche 911 Carrera

1 Answer

Advance tracking system turning off and abs light is on

You need to get the brakes checked. The brakes ABS warning is a fairly accurate system and it probably is made to shut off the tracking system because without brakes, the tracking system can not work properly.
The tracking system and ABS work by counting the revolutions to the wheels and balance left and right sides by using the brakes. If brake debris or bad brake pads interfere with the counting, the warning will engage.
You may be able to save the rotors with prompt action, but know that the brakes are not within specifications and are headed for a metal to metal conflict.

Mar 30, 2012 | 2005 Ford Explorer

1 Answer

1994 Audi 80 2.0 ABS Light Comes On then Engine Cuts Off

abs fault if you feel it though the pedal its activating, it should not activated, you will probably need to replace the abs unit as it would be the valve in the pump. engine cuts out as its found a fault.

Jun 07, 2017 | 1992 Audi 80

Not finding what you are looking for?
2004 Buick Rendezvous Logo

805 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides