Question about 2000 Ford Ranger SuperCab

1 Answer

TRYING TO LOCATE THE PCV VALVE ON MY 2000 FORD RANGER XLT, 3.O 6 CYLINDER HELP...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

It is located on the passenger side of engine. It is mounted on the valve cover and a hose runs up to the black air intake housing, it comes from the air filter to the carburator

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the PCV valve on 2006 ford f150 xlt


PCV valve is normally located in one of the valve covers and connects to a vacuum source near the fuel intake assembly. Connecting hose is normally about 3/8 inch in diameter.

Sep 11, 2014 | Cars & Trucks

1 Answer

Location of pcv valve on 2005 ford ranger 4.0


positive crankcase valve is located on the back of the valve cover on the right valve cover i believe if your looking at the engine, you will need to remove some hoses to be able to access the pcv valve, here is a diagram to helpnissankid88_1.gifnissankid88_2.gif

Sep 13, 2011 | 2005 Ford Ranger

1 Answer

Where is the pcv valve located on a 1993 ford ranger xlt 2.3L ?


I'll do my best to explain. The PCV is located center, upper engine area, driver side of engine, between engine block and intake manifold, mounted in vacuum hose. I hope you got that and that it helps you. Good luck.

Mar 24, 2011 | 1993 Ford Ranger SuperCab

1 Answer

2000 ford xlt 3.0 ranger, sudden intermitent idle problems


Study up on what an Idle Air Control Valve does then make your decision. They can be expensive.
Search fault symptoms

Nov 25, 2009 | 2000 Ford Ranger SuperCab

1 Answer

How do i change a pcv valve on a 1993 ford ranger xlt 4.0L


Hello there:
first off make sure you have the right one for the truck.
Now just pull the old one off of the valve cover and remove it from the hose and insert the new one than reinsert it on the valve cover and you are done.

Aug 10, 2009 | 1993 Ford Ranger SuperCab

3 Answers

Where is the ignition module control located on 1996 ranger 2.3 e


It does not have an ignition control module. The PCM (powertrain control module) fires the coil pack based on signal it recieves from the crankshaft position sensor and the camshaft position sensor.

Apr 08, 2009 | 1996 Ford Ranger SuperCab

3 Answers

Where is the pcv valve located on a 2003 ford ranger


  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Feb 27, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Pcv valve


    the pcv should be on the back side(firewall) of left(drivers) valve cover.

    Oct 26, 2008 | 2005 Ford Ranger

    1 Answer

    How do i replace the pcv valve on a 2000 explorer xlt v6 sohc?


    On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

    A good source of information for Ford Explorers can be found here

    Jul 22, 2008 | 2000 Ford Explorer

    1 Answer

    PROPORTIONAL VALVE ON MASTER CYLINDER LEAKING


    it is not a dealer item is should come on the master if you buy a new one not a rebuilt some rebuilts have them

    Jun 30, 2008 | 2000 Ford Ranger SuperCab

    Not finding what you are looking for?
    2000 Ford Ranger SuperCab Logo

    Related Topics:

    321 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5481 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...