Question about 2002 Honda CR-V

1 Answer

This just happened to me yesterday.

My shield accutually fell off. Does this need to be replaced? Who can replace this? Do I have to go to the dealer to have this replaced? How long can I go without having it replaced?? Any information that anyone has will be greatly appreciated. Thanks in advance.

Posted by on

  • bonnielee54 Sep 04, 2009

    The heatshield was located in the front of the undercarriage between the front wheels.

  • Roberta Smith
    Roberta Smith May 11, 2010

    what shield do you mean ?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

The shield will cost you around $100 for a new one or you can go to a junk yard and find a much cheaper one for your car.

If you still have the old one, you can just drill a few holes into the frame and screw the shield back on.

It's highly recommended to have the heat shield as that really does disperse the heat and keep it away from the underside of the car and especially away from the gas tank....

Posted on Sep 04, 2009

Testimonial: "Thank you so much. Atleast I now know what to do."


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Muffler heat shield fell off. Should it be replaced?

it is not just a heat shield,it "bounces"soundwaves away from the box.(keeping the interior quiter)BUT if its NOT the cat shield dont worry about it.(the cat runs VERY hot.)

Nov 08, 2010 | 2007 Toyota Camry

1 Answer

The push button switch for 99 honda accord ex map light broke and fell out. Is the a common problem?

Not common but it happens try getting a replacement unit from a salvage yard. Dealer will be expensive and the cars are around due to accidents and that piece never gets damaged in an accident. Hope this helps or reply with more questions about removal and replacing. Good luck

Apr 29, 2010 | 1999 Honda Accord

1 Answer

I have a 2006 ford fusion and yesterday I tried

sounds like one of the tumblers fell down and it has the keys jammed.
need to replace the key and tumblers

Feb 09, 2010 | Ford Fusion Cars & Trucks

1 Answer

A case or shield fell of from the center of the car's underside. What is it and do I need to replace it?

You have lost the cover which stops oil leaks dropping on the road and in some cases road dirt getting to the underside of the engine

If you are not bothered about oil marks where you park your car it does not really matter if there is one on or not .

If the old one is damaged it is cheaper to get one from a wreckers yard than pay for one from the dealer

Jul 09, 2009 | 2004 Dodge Stratus

1 Answer

Left rear splash shield 2002 Altima fell off

4 clips to the fender. 3 bolts to the body frame. the splash shield cover the tire.

Apr 23, 2009 | 2002 Nissan Altima

2 Answers

Front ball joint and drive axle fell out on 2000 acura TL

Call a dealer and give them the vin #, they may or may not tell you if there is a recall for that. If the car was bought at a used car lot,and if there is some kind of warrenty on it, Go back and tell them what happened. Depending on what a repair shop charges an hour, about 2 to $300.00.

Apr 06, 2009 | 2000 Acura TL

1 Answer

My car was not properly jacked up and fell. Was making noise mechanic thought it was the rotor and replace it. still makes grinding noise. What could be causing to still be making noise

the dust shield behind rotor could be touching wheel or rotor,safly jack up vehice take tire off of suspected side, inspect dust shield carefully if bent . id shouldnt take much to straighten out.

Aug 04, 2008 | Daewoo Nubira Cars & Trucks

Not finding what you are looking for?
2002 Honda CR-V Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides