Question about 2003 Hyundai Santa Fe

Open Question

I have a 2003 hyundai santa fe 2.0 ltr diesel and i need to change the timing belt can you give me the proceedure i am pretty good with engines

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No spark on the ignition coils


my car would turn over but wouldn 't start, after changing all the same stuff you did it kept not starting again , so i changed the purge control valve and it's been good so far . seems to be a common problem, there are 2 on the car but they say its the one on the engine they always replace, better check that first to be sure.

Mar 28, 2014 | 2003 Hyundai Santa Fe

1 Answer

Replacing timing belt on 2003 hyundai santa fe 2.7


"POP" LIKE A BACKFIRE???.....TIMING BELT IS 1 OR MORE TEETH OFF

Jul 30, 2012 | 2003 Hyundai Santa Fe

1 Answer

Does the 2002 hyundai santa fe have an interference engine? It has a 2.4L 4-cylinder.


Hi:
All of the engines in Hyundai santa fe are interference engines, so you should regularly change your timing belt. The timing belt also drives the water pump, so it is always a good idea to change that too, if you have the engine apart for the timing belt. Here is a link to check out!

http://www.theautopartsshop.com/auto+car-usa+parts/hyundai+santa-fe+engine-timing-belt.html

Apr 21, 2010 | 2002 Hyundai Santa Fe

1 Answer

I need to change the timing belt . i have a 2003 hyundai sante fe and the belts are squealling


If your belts are squealing it is the drive belt/belts that need attention not the timing belt. You need to check your belt tension and condition and replace as needed. If a timing belt ever got to the point that it might squeal the car would not run because it would be too far out of time. Your belts will all be external whereas at timing belt is internal and a major part of the engine.

Dec 02, 2009 | 2003 Hyundai Santa Fe

1 Answer

I need to know where the location of the alternator is on my 2003 santa fe so I can check to see if the belt is loose


Engine size??? Just check ALL of the belts. it only has 1 or 2, depending which engine you have.

Oct 28, 2009 | 2003 Hyundai Santa Fe

1 Answer

How do we remove head from a 2litre diesel santa fe


Sounds like a first-time project; don't start on this without documentation available. If the factory service manual is too costly (often the case), I recommend Haynes manuals which will give you all the information you need for any project you can do at home:
Santa Fe manual

Oct 22, 2009 | 2003 Hyundai Santa Fe

1 Answer

Is it hard to change crank shaft position on hyundai santa fe 01


2.7 engine located above the starter. You need to remove the starter outherwise its fairly easy.
The 2.4 & 3.5 engine, its located in the front next to the timing belt, a little more complicated to to install.

Apr 14, 2009 | 2001 Hyundai Santa Fe

1 Answer

2003 Santa fe timing belt change


You can drive it till it breaks of course, that will cost much more then replacing it as maintenance though. I would plan to have it changed much sooner then later as you are already past your recomended service time.

Dec 16, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...