Question about Hyundai Motor 1997 Tiburon

2 Answers

Transmision wont go in R 2 4 but 1&3 is fine

Transmision wont go in R,2,4 but 1&3 is fine 97 hyundai tiburon

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If you have a manual transmission it sounds like you have broken or lost a clip or mount that holds you shift cable in position. You need to follow the shift cable from the trans to the place where it mounts to the trans and hook it back up. It should not be a bad transmission since you have all your upper gears on the tree (1&3) and have problems getting to the bottom gears (3,5,& R). I have seen this problem before so good luck. If you have an automatic transmission follow prior advice and run to the dealer.

Posted on May 12, 2010

  • mdepreste May 12, 2010

    In my post I meant 2,4,& R didn't mean to confuse ya

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Do you have a check engine light? If so,get it checked out. (Free at most major auto parts stores). It sounds like it's in limp home mode. The manufacturers made the electronics so that you could still get it home if any of the electronics failed. Sounds like your shift solenoids have failed you, but it's anyone's guess until you get the thing scanned. No one on here can give you a definate answer until that happens. Find out what codes it's showing and then get back on here with them. I took the time to answer, now please take the time to rate my answer.

Posted on Sep 04, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: transmision wont go in R 2 4 but 1&3 is fine

My experience is a faulty pin in the transmission, but yes, get the transmission repaired.

Posted on Dec 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a hyundai fx coupe 97 and I put my foot on the clutch it moves about 2-3 inches and that's it. its hydolic clutch


My friend it is a serious matter either your gear plate is jamed so please go to the servise center of hyundai fx......................

Sep 22, 2014 | Hyundai Motor 1997 Tiburon

1 Answer

What are the valve clearances specs for a 97 tiburon 1.8L?


This info may help.
http://www.rebuiltautoengines.com/hyundai-tiburon-articles.html

Aug 14, 2014 | Hyundai Motor 1997 Tiburon

1 Answer

My 97 tiburon wont go into gear and the clutch lost pressure...any suggestions?


Check the clutch master cylinder. If it's low or empty, add some brake fluid and bleed the clutch slave cytlinder down on the bell housing.
Good luck.

May 10, 2012 | Hyundai Motor 1997 Tiburon

2 Answers

My 2003 tiburon was working fine turned it off after i got home from work the next day right before work get in and the car wont turn over or fire its like it was dead but checked the battery and...


Hello Kimberly 210,

I looked up your ignition to assure MYSELF your
key ... is indeed a standard TRANSPONDER.
(no idea what country we are talking about...??)

That type of response SEEMS to be a SECURITY
response... As though ONE of your keys is in trouble...

(TRANSPONDER KEYS can be damaged & intermittent) ...

My best advice is to get on eBay and find yourself
a COUPLE of NEW uncut OEM key replacements...

Shop around and find out if you have a cooperating
locksmith who will cut and code the keys for you...

The BEST price I've paid was $6 per key cut...
The worst was $60..
(they ruined my OEM key and sold me a generic
(I felt it was deliberate.. my OPINION)).

IN ANY CASE: If you wait until the key goes bad a DEALER CAN GET (page 120, 3-10 owners manual)
from $300 to $600 for full key service AND that
IS NOT INCLUDING the tow charges.

Some cars allow you (the owner (nothing found))
to code the keys yourself...

but you CANNOT do it WITHOUT at least TWO (2)
WORKING KEYS...

Sorry... I don't know TIBURON specifics

http://www.rockauto.com/en/catalog/hyundai,2003,tiburon,2.7l+v6,1415876,ignition,ignition+lock+cylinder,10041

More Information for STANDARD MOTOR PRODUCTS US673L

HYUNDAI TIBURON 2001 2008 GENUINE BRAND NEW BLANK TRANSPONDER KEY...

Owner manual (same site has WORKSHOP MANUAL)
Hyundai 2003 Tiburon Owner Manual

May 20, 2017 | 2003 Hyundai Tiburon

1 Answer

Where is the 97 tiburons (light blue) brake relay located?


there is no stop lamp relay on this model. See diagram below. If your stop lamps aren't working, check the fuse (#3, 15 amps) and the brake light switch above the pedal. Please let me know if you have any questions.

jturcotte_146.gif

Nov 12, 2010 | 2003 Hyundai Tiburon

3 Answers

Transmision wont go in R 2 4 but 1&3 is fine


You need to have the transmission repaired. There is a faulty Solenoid inside the transmission.

Sep 04, 2009 | Hyundai Motor 1999 Tiburon

1 Answer

What's the torque for the flyweel on a 2.7 engine hyundai tiburon 03


Actual specs can be found at the dealer or in a Hayne's manual in the local auto parts store. After 17 years of doing this, I'd just take my air gun & stagger tighten the bolts,until snug, then go over them with no more than 3 "clicks" of the air gun. It'll work fine,guarunteed.

Jun 21, 2009 | 2004 Hyundai Tiburon

1 Answer

HOW DO I CHANGE TRANSMISION FLUID IN A 2004 TIBURON


no drain plug you have to losen the bolts around the pan and let the fluid drain slowly let most of the fluid seep out befor removing bolts completly so the pan dont get bent

Mar 20, 2009 | 2004 Hyundai Tiburon

Not finding what you are looking for?
Hyundai Motor 1997 Tiburon Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...