Question about Hyundai Motor 1999 Tiburon

3 Answers

Transmision wont go in R 2 4 but 1&3 is fine

Transmision wont go in R,2,4 but 1&3 is fine 97 hyundai tiburon

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

My experience is a faulty pin in the transmission, but yes, get the transmission repaired.

Posted on Dec 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

You need to have the transmission repaired. There is a faulty Solenoid inside the transmission.

Posted on Sep 04, 2009

Testimonial: "Thank you I apperitate your time"

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Hyundai Master
  • 14,585 Answers

Have it scanned. There isn't any solenoids inside the transmission on Hyundai's.

Posted on Apr 28, 2015

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: transmision wont go in R 2 4 but 1&3 is fine

If you have a manual transmission it sounds like you have broken or lost a clip or mount that holds you shift cable in position. You need to follow the shift cable from the trans to the place where it mounts to the trans and hook it back up. It should not be a bad transmission since you have all your upper gears on the tree (1&3) and have problems getting to the bottom gears (3,5,& R). I have seen this problem before so good luck. If you have an automatic transmission follow prior advice and run to the dealer.

Posted on May 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got a hyundai fx coupe 97 and I put my foot on the clutch it moves about 2-3 inches and that's it. its hydolic clutch

My friend it is a serious matter either your gear plate is jamed so please go to the servise center of hyundai fx......................

Sep 22, 2014 | Hyundai Motor 1997 Tiburon

1 Answer

What are the valve clearances specs for a 97 tiburon 1.8L?

This info may help.

Aug 14, 2014 | Hyundai Motor 1997 Tiburon

1 Answer

My 97 tiburon wont go into gear and the clutch lost pressure...any suggestions?

Check the clutch master cylinder. If it's low or empty, add some brake fluid and bleed the clutch slave cytlinder down on the bell housing.
Good luck.

May 10, 2012 | Hyundai Motor 1997 Tiburon

2 Answers

My 2003 tiburon was working fine turned it off after i got home from work the next day right before work get in and the car wont turn over or fire its like it was dead but checked the battery and...

Hello Kimberly 210,

I looked up your ignition to assure MYSELF your
key ... is indeed a standard TRANSPONDER.
(no idea what country we are talking about...??)

That type of response SEEMS to be a SECURITY
response... As though ONE of your keys is in trouble...

(TRANSPONDER KEYS can be damaged & intermittent) ...

My best advice is to get on eBay and find yourself
a COUPLE of NEW uncut OEM key replacements...

Shop around and find out if you have a cooperating
locksmith who will cut and code the keys for you...

The BEST price I've paid was $6 per key cut...
The worst was $60..
(they ruined my OEM key and sold me a generic
(I felt it was deliberate.. my OPINION)).

IN ANY CASE: If you wait until the key goes bad a DEALER CAN GET (page 120, 3-10 owners manual)
from $300 to $600 for full key service AND that
IS NOT INCLUDING the tow charges.

Some cars allow you (the owner (nothing found))
to code the keys yourself...

but you CANNOT do it WITHOUT at least TWO (2)

Sorry... I don't know TIBURON specifics,2003,tiburon,2.7l+v6,1415876,ignition,ignition+lock+cylinder,10041



Owner manual (same site has WORKSHOP MANUAL)
Hyundai 2003 Tiburon Owner Manual

May 20, 2017 | 2003 Hyundai Tiburon

1 Answer

Where is the 97 tiburons (light blue) brake relay located?

there is no stop lamp relay on this model. See diagram below. If your stop lamps aren't working, check the fuse (#3, 15 amps) and the brake light switch above the pedal. Please let me know if you have any questions.


Nov 12, 2010 | 2003 Hyundai Tiburon

2 Answers

Transmision wont go in R 2 4 but 1&3 is fine

Do you have a check engine light? If so,get it checked out. (Free at most major auto parts stores). It sounds like it's in limp home mode. The manufacturers made the electronics so that you could still get it home if any of the electronics failed. Sounds like your shift solenoids have failed you, but it's anyone's guess until you get the thing scanned. No one on here can give you a definate answer until that happens. Find out what codes it's showing and then get back on here with them. I took the time to answer, now please take the time to rate my answer.

Sep 04, 2009 | Hyundai Motor 1997 Tiburon

1 Answer

What's the torque for the flyweel on a 2.7 engine hyundai tiburon 03

Actual specs can be found at the dealer or in a Hayne's manual in the local auto parts store. After 17 years of doing this, I'd just take my air gun & stagger tighten the bolts,until snug, then go over them with no more than 3 "clicks" of the air gun. It'll work fine,guarunteed.

Jun 21, 2009 | 2004 Hyundai Tiburon

1 Answer


no drain plug you have to losen the bolts around the pan and let the fluid drain slowly let most of the fluid seep out befor removing bolts completly so the pan dont get bent

Mar 20, 2009 | 2004 Hyundai Tiburon

Not finding what you are looking for?
Hyundai Motor 1999 Tiburon Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides