Question about 1983 Chevrolet Blazer

2 Answers

My headlights don't work, my tail lights dont work. my brake lights work. when i use my signals they act like hazards. fuses are good. what could the problem be?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Check fuses under the hood and under drivers side steering wheel,check fuses for lights,taillight,hazards,and the main on is instrument panel fuse or back up fuse,if thats not the problem and there all good then your switch is out that turns the lights on and off on steering wheel or side.if my info was any help to you please leave a comment,note,vote.thankyou

Posted on Sep 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 291 Answers

Short in main harness.. but first i would check all bulbs... by this i mean pull out each bulb look at base make sure the two contact on bottom base of bulb are not melted together... aslo look good inside bulb.. to make sure the two elements inside bulb are not shorted....don't forget to check the wires to the towing plug if have one

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you find short from fuse box on 99 Cadillac Deville works the tail lights, hazard, headlights, blinkers, cruise, brake lights, coolant fans?? All fuses checked good.


Hi Mary ANN , need some clarification ,the fuse's for all these thing's you have listed , the tail lights, hazard, headlights, blinkers, cruise, brake lights, coolant fans are good ? If good what makes you think you have a short ? Explain ! Are these thing's not working ? That wouldn't mean you have a short . You could have a bad ignition switch !

Oct 19, 2015 | Cadillac Cars & Trucks

1 Answer

Hazard lights malfunction


YOU MIGHT HAVE A BURNT OUT RELAY IN FUSE COMPART UNDER YOU CARS HOOD CHECK THAT OUT THRU YOUR CARS MANUAL,IT WILL SHOW YOU WHICH RELAY IT IS?

May 24, 2013 | Cars & Trucks

1 Answer

85 Celica. all turning signals not working(front and back) brake/tail lights also out. headlights n hazards r good.


WOW ,start by looking what muffler got cought up in ,start testing for power from steering column bottom ,and yes it could be the hand set on steering wheel.

Mar 17, 2017 | 1985 Toyota Celica

1 Answer

Tail lights and dash lights dont work


The common power source for the tail lights and instrument cluster is the 20A TAIL LPS fuse(s) in the fuse block. BUT, in the case of the instrument cluster, there are actually two fuses with the same identification. Replacement of the fuse with the ORG wire connected should restore the tail lights when you set the turn/hazard/headlight switch to PARK and may restore the instrument cluster lamps. If not, replacement of the second fuse with the two YEL wires connected should solve the problem

Oct 26, 2012 | 1995 Pontiac Grand Am

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

No turn signals,brake lights. have tails lights. all fuses in fuse box under check out ok


The turn signals and the brake lights go through the hazard switch. Try cycling it a few times and see if that solves the problem. If the fuses are good and the 4way's don't work, I would suspect that switch.

Sep 21, 2011 | 1994 GMC Suburban

2 Answers

Tail lights, parking lights and dashboard lights on 2004 grand marquis are inoperative. Headlights, turn-signal lights, brake lights, hazard lights, back-up lights all work


Tail lights, parking lights and dash lights are all on the same circuit...I'd go to the fuse panel under the dash and check the fuse for those lights....usually referred to as accessory lighting in the owners manual and is usually a 10A fuse.

Hope this helps...

Aug 27, 2011 | Mercury Grand Marquis Cars & Trucks

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

1 Answer

Left side brake and hazard lights don"t work


sounds like a bad turn signal switch, wiggle it , just a little bit,... see if some of the lights start to work. do your turn lights work correctly??

Dec 02, 2008 | 2000 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...