Question about 1992 Chevrolet Lumina

1 Answer

I just put brand new spark plugs and wires on my 1992 chevy lumina and its still be missing like a putt,putt,putt sound and then if i hit the gas to hard in forward or reverse it kills what could that be?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

There are three coil packs start by removing one wire off each coil this should show witch one is dead

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1992 Chevy Lumina euro 3.1 liter engine will not start check the spark plugs for spark and there was no spark what is my problem


Hi, you probably have a bad spark pack. If I remember correctly, there is a spark pack for two spark plugs so three total.

Jan 24, 2015 | 1992 Chevrolet Lumina

1 Answer

I have a 1992 chevy lumina 3.4L engine and I had to replace the starter. I am putting the starter in and I need to know how many wires to hook up? My dad thinks there's a wire missing.


Dual overhead cam (euro)?

the small purple wire will go to the small terminal on the starter. there should be 3-4 other wires that attached to the large terminal of the starter.

Feb 08, 2012 | 1992 Chevrolet Lumina

1 Answer

I have a 91 Chevy Lumina, just replaced the injectors and all the coils on saturday and ran fine but when driving it would have trouble it seemed shifting, starting today when you hit the gas the car dies...


Your ignition spark control module is going bad,your coils pack are located right underneth them. this is what tells your coils packs to produce spark to your spark plugs. they are easy to replace just make sure you mark you coil pack with some tape and make sure you put them back in the same order as they came off the spark control module. Easy to replace,just make sure you use the proper size torx or socket size on the screw heads...

May 31, 2011 | 1991 Chevrolet Lumina

4 Answers

1992 chevy lumina turned it off and it won't start back up. the starter is good. engine not seized up, only possible solutiion i see may be a red wire attached to a gray clip near the battery, it's...


need more information:
1. does the motor turn over when cranking, and just
won't start?
2. if not, when you turn the key to on position can you hear the fuel pump kicking in?

Mar 31, 2010 | 1992 Chevrolet Lumina

2 Answers

1993 Chevy Lumina


what about your antitheft system i have seen lots of ign key cylinders go bad and cannot read the keys resistance

Oct 09, 2009 | 1993 Chevrolet Lumina

1 Answer

Takes a long time to start,when started it putts.


distributer cap and button are weak it sounds like
put the screw driver in the spark plug boot. close to a ground
make sure its not aluminum.
turn the engine over when its somewhat dark
look for the intensity of the spark.
if the sparks bright then its strong IE if the sparks not strong means its the coil that needs to be replaced.or the wires
More then likely its the cap button or plug wires..
if there is any cracks in the wires they will leak power out.. making it use more gas to make it run.

May 29, 2009 | 1995 Buick LeSabre

2 Answers

Engine missing but no check engine light on


when mine did that it was the coil pack... if you are brave and have some heavy duty rubber gloves... start the motor and pull one lead at a time from the coil pack... any change in the motor... if not plug it back in and move to the next wire. if you unplug a wire and notice no change it's likely you have found your problem.

As a side note when you replace the coil pack it goes 1.2.3 but when you do the next side it's 4.6.5. (engineering humour i think)

Robert

Please take a moment to rate this solution
Thanks

Jan 26, 2009 | 1998 Ford Windstar

1 Answer

2004 chevy cavalier


Did you change the rubber spark plug boots when you put in the new plugs? Do you have a check engine light on? If so, find out the code and this should help you pinpoint the problem.

Dec 18, 2008 | 1995 Chevrolet Lumina Apv

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...