Question about 1994 Dodge Stealth

2 Answers

Need to bleed clutch to get peddle

Have a 1992 dodge stealth rt non turbo fwd,different motor,new clutch kit,new slave cylinder,the parts are all on but the clutch peddle sticks to floor and clutch isnt coming in

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Try to vacuum bleed the system at the master most hand vacuum kit come with adapters to fit over the master reservoir otherwise the system may need a new master or you may have a leak

Posted on Sep 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,140 Answers

2 diff ways. Both take 2 people.
Make sure master cyl cup stays full.
1- Open bleeder on slave cyl push cl pedal, close bleeder. Repeat until no air in system.

2- Pump clutch pedal 8-10 times, open bleeder, close bleeder. Repeat until no air in system.

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clutch slave cylinder


Hi Tony,

Typically what happens is the master cylinder went dry. The most reliable way to make it work is to PRE BLEED the master cylinder and then start again.
Go to the parts store and pick up a MC bleed kit. This has little hoses and fittings. You disconnect the line out of the mc, and hood the hose in, and route the other end under the surface level of the fluid in the mc reservoir. Pump until no more bubbles.
FROM This point, be certain that the mc does not run out of fluid!!!.
Hook up the hose and commence bleeding the line and slave cylinder.

Feb 24, 2014 | Cars & Trucks

1 Answer

Where is the bleeded valve for a 1980 924 turbo porsche clutch


The Bleed valve is part of the Clutch Slave Cylinder. The Clutch Slave Cylinder is mounted to the Side of the Transmission.... Make sure that you Fill the Clutch Master Cylinder Reservoir EVERY TIME YOU BLEED IT. It drains quickly

Apr 05, 2013 | Porsche Cars & Trucks

1 Answer

1994 Dodge Stealth RT, V6 DOHC non turbo, overheating.......car bible shows thermostat in bottom radiator housing........parts store only shows a gasket for the top radiator hose housing, which the book...


in most vehicles it is in the housing where the top radiator goes onto the engine, but in some vehicles it is at the bottom ( especially subaru vehicles)......cheers.

Sep 20, 2011 | 1994 Dodge Stealth

3 Answers

The clutch peddle will not come up it stays on the floor


Check on the upper part of the pedel to see if the clip that connects the pedel to the clutch master cylinder has poped off If the clutch pedel is on the floor this is a likely sulition and relitively easy repair you just reattach the clip

Nov 06, 2010 | 1992 Honda Accord

1 Answer

How do i obtain original computer # for 1992 dodge stealth sohc


if you have a SOHC engine 92 stealth from California the number will be ;MD153355
SOHC Federal emission ECU number will be ;MD153354 .
DOHC , AWD , Turbo Cali emissions ; MD159965
DOHC , AWD ,Turbo federal emmissions ;MD159966
DOHC non-turbo Calif ;MD159962
DOHC non-turbo fed. ; MD159963

Sep 29, 2010 | 1992 Dodge Stealth

5 Answers

Stuck clutch pedal on a Mazda B series truck


Replace both clutch slave and master cylinders, and bleed well. I've also had this happen.

Jul 11, 2009 | 1988 Mazda B2200

1 Answer

Clutch peddle will not mash. we replaced clutch, presser plate, throwout bearing and master cylender and hose to slave cylender and clutch peddle won't mash you can take slave cylender loose fro...


when you bleed the system you need to force fluid from the slave cylinder up threw the master cylinder . this is proper way to bleed clutch system.

Jul 02, 2009 | 2003 Hyundai Santa Fe

2 Answers

I put a new clutch pressure plate and throw out bearing in my 1993 dodge stealth along with a new slave cylinder and itr wont disengage


Sounds like you may have some air in the clutch..Try and bleed the clutch a few times and see if that helps the problem..Hope this helps you and have great night....

Apr 06, 2009 | 1993 Dodge Stealth

2 Answers

Clutch goes to floor will not engage


The bleeder is located on the slave cylinder at the bell housing of the transmission. Follow the clutch pressure line down to the bell housing, and you will find the bleeder. To bleed the system properly, you will need to have someone push the clutch in, and hold it until you open the bleeder, and close it again. Repeat steps until you have a good solid clutch pedal. Make sure to not let the fluid level in the reservoir get too low as it can **** in air, and you have to start all over.

Mar 30, 2009 | 1994 Dodge Stealth

1 Answer

Transmission


Hello
You don't want to put a es transmission into a rt the es it fwd and the rt is awd
RD

Jan 09, 2009 | 1994 Dodge Stealth

Not finding what you are looking for?
1994 Dodge Stealth Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...