Question about 1981 Ford F 150

1 Answer

Will it damage my engine in my 96 ford bronco if i use the old 154.... firing order instead of the newer 137..... firing order i ask kuzz my engine runs rough kinda hops a bit and has no power and i just bout this truck and the guy said he had a different moter put in it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

If the engine has been swaped, it could very well be the old style firing order as you call it. There are a couple of ways to find out. First if the intake is the one that came with the replacment mtr, then you should be able to find that engines firing order on the intake- normally right in front of the thrrottle body/carb. The other way would be to rotate engine over by hand slowly and see where the rotor points in relation to the terms on the cap and check that cyl with the plug removed to see if in fact that it waas on a compresion stroke near top dead center or at least on the final stroke of it. GL

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 87 ford bronco 5.0L 302 and when I turn the wheel either way the truck stalls. I have just got done replacing the power steering pump, the pressure witch , and pressure hoses.


Bucking Bronco (unpredicatable stalling) - 80-96 Ford ...

broncozone.com > Technical Support > 80-96 Ford Bronco Tech Support
Jan 7, 2011 - 20 posts - ‎5 authors Page 1 of 4 - Bucking Bronco (unpredicatable stalling) - posted in 80-96 Ford BroncoTech Support: I have a 1996 Bronco. ... BUT, on the way home today--about 25 miles into the trip, it started again. ...... F4PZ-9155-B Kit BB - 1990/91 5.0L/5.8L/7.5L (allwheel bases except 137" WB and 161" WB) AG $ ...

Oct 29, 2015 | Ford Cars & Trucks

1 Answer

1988 ford bronco 4x4 fuil injection is the firing order the same as carb engin eng.302


1988 Ford Bronco Full Size 5.8 liter V-8 VIN "H"

a60a6d1.gif


Hope helps.

Jul 21, 2010 | 1988 Ford Bronco

1 Answer

Ford 351 windsor engine diagram


ford-351-windsor-engine-diagram-p05qnqdskqjeezv3eiltmave-1-0.jpg Here's a mechanical blow-up of an 80's 351w engine.



ford-351-windsor-engine-diagram-p05qnqdskqjeezv3eiltmave-1-2.jpg and the firing order layout.
hope this helps...

Jun 23, 2010 | 1991 Ford Bronco

1 Answer

Firing order for ford bronco 5.0 302


1-5-4-2-6-3-7-8
Distributor goes in counter clockwise rotation
Looking at engine from the front, #1 plug is the very first one on the left side of engine.

May 05, 2010 | 1988 Ford Bronco

4 Answers

What is the firing order for a 1984 ford bronco 2


1-4-2-5-3-6
Now you need to know which cylinder is which. If you stand at the front of the truck looking at the engine, the number 1 cylinder is on the left closest to you. The left bank has cylinders 1-3-5 and the right bank has 2-4-6. So number 1 is at the left front and number 6 is at the right rear.

Jan 25, 2010 | 1984 Ford Bronco II

2 Answers

Firing order for 1994 f150 v8 302 engine


Ford Pick-ups and Broncos 1987-1996 Repair Guide
FIRING ORDERS (see Figures 1, 2, 3 and 4)

To avoid confusion, replace spark plug wires one at a time.

8c95667.jpg

Fig. 1: 5.8L engine-nl-> Firing order: 1-3-7-2-6-5-4-8-nl-> Distributor rotation: Counterclockwise

d8f4563.jpg

Fig. 2: 4.9L engine-nl-> Firing order: 1-5-3-6-2-4-nl-> Distributor rotation: Clockwise

7937393.jpg

Fig. 3: 5.0L and 7.5L engines -nl-> Firing order: 1-5-4-2-6-3-7-8-nl-> Distributor rotation: Counterclockwise

536893f.jpg

Fig. 4: 6.9L and 7.3L Diesel engines-nl-> Injection order: 1-2-7-3-4-5-6-8


I hope help you with this (remember rated this help) Good luck.

Oct 07, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

Spark plug wiring


Ford Pick-ups and Broncos 1987-1996 Repair Guide
To avoid confusion, replace spark plug wires one at a time.



3f891cd.jpg

Fig. 1: 5.8L engine-nl-> Firing order: 1-3-7-2-6-5-4-8-nl-> Distributor rotation: Counterclockwise

4d7cb6a.jpg

Fig. 2: 4.9L engine-nl-> Firing order: 1-5-3-6-2-4-nl-> Distributor rotation: Clockwise

4670971.jpg

Fig. 3: 5.0L and 7.5L engines -nl-> Firing order: 1-5-4-2-6-3-7-8-nl-> Distributor rotation: Counterclockwise

e2e0c7b.jpg

Fig. 4: 6.9L and 7.3L Diesel engines-nl-> Injection order: 1-2-7-3-4-5-6-8


I hope help you (remember rated this help) Good luck.

Oct 05, 2009 | 1994 Ford Bronco

1 Answer

Firing order 302


the block is the same but one might be distributor and other distributorless.

Sep 04, 2009 | 1981 Ford F 150

2 Answers

Firing order for 1989 full size ford bronco 302


13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front

Apr 22, 2009 | 1989 Ford Bronco

1 Answer

Engine wont start!


Have you checked for spark?

Mar 19, 2009 | 1988 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...