Question about 2002 Chrysler Town & Country

1 Answer

Need cylinderhead torque specification for03chry.t&c van 3.8

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Cylinder Head Torque Step Min. Max. Note(s) 1 45 (ft. lbs.) 45 (ft. lbs.) - 2 65 (ft. lbs.) 65 (ft. lbs.) - 3 65 (ft. lbs.) 65 (ft. lbs.) - 4 *90 (degrees) *90 (degrees) 429 Note *: Value is given in degrees. Turn the fastener this additional amount past the previous step.
Note 429: Torque should be above 90 ft/-LBS or replace bolt.

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We need the cylinderhead torque settings as well as the timing marks for the Nissan UD40 FD46 motor. can you possibly assist? Thanks


1. 29 nm
2. 59 nm
3. slacken off bolts
4. 29 nm
5. 50-55 degrees with angle torque gauge or 54-64nm
10_3_2016_6_03_48_pm.jpg

Oct 03, 2016 | Nissan Cars & Trucks

2 Answers

CYLINDERHEAD TORQUE SPECIFICATION OF NISSAN ALMERA 1.8 16V ELEGANCE


tighten main large cyl head bolts like this. stage 1. 29nm
stage 2 .59nm stage 3.slacken off. stage 4. 29nm. then stage 5 50 t0 55 degrees start in the centre of the head and work outwarward diagonaly then tighten the small bolts @the front of the head 6.8 to 8nm

Mar 18, 2016 | Nissan Cars & Trucks

2 Answers

Cylinderhead torque settings


I'm not sure what engine you have in your 95 grand am SO I will give you both the 4cyl and 6cyl Specs. Also you didn't ask for the torque sequence. I will include that as well for both. 2.3 DOHC Quad 4cyl: Torque sequence---> front ' 7 3 1 5 9 ' of engine ' 8 6 2 4 10 ' Step 1: torque bolts 1 thru 6 (26 Ft/Lbs & 90 degree turn) Step 2: torque bolts 7 & 8 (15 Ft/Lbs & 90 degree turn) Step 3: torque bolts 9 & 10 (22 Ft/Lbs & 90 degree turn) Recheck final torque in sequence *** CAUTION *** This engine uses "Torque To Yield" (TTY) head bolts that means they permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed in order to obtain proper torque. 3.1 liter V6 Torque sequence--> ' 6 2 3 7 ' ' 5 1 4 8 ' Step 1: torque bolts in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION *** This particular engine uses "Torque To Yield" head bolts(TTY) (that means the bolts permanently stretch during the initial installation.) You MUST use NEW head bolts when replacing or reinstalling the cylinder head in order to obtain the proper torque.

If you need further help, reach me via phone at https://www.6ya.com/expert/tasa_06404e20147f8840

Aug 22, 2014 | 1995 Pontiac Grand Am

1 Answer

Torque settings cylinder


There's no way to know unless you can tell us the make/model/year of the vehicle, and which engine it has. There are a thousand different engines, and they all have different cylinder head torque patterns & sequences.

Aug 12, 2014 | Cars & Trucks

1 Answer

Torque specs main bearing caps ,conrod cap, head bolts,etc for 2008 Toyota 1KZ-TE


go to auto zone .com and become a member its free then u can look up the manual on any car your welcome

Feb 23, 2013 | Toyota Cars & Trucks

1 Answer

REPLACING CYLINDERHEAD-TORQU SPEXS NEEDED


For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.

Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)

Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of theconnecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90 more
4. Check that the crankshaft turns smoothly.

Sep 11, 2012 | Cars & Trucks

1 Answer

I need the cylinderhead torque settings for 2004 1.3 city golf. Please assist


The head torque settings are 75 nm plus a further 90 degrees (102 ft/lbs)

The torquing sequence is:-

9 5 1 3 7
front
10 6 2 4 8

Mar 17, 2011 | Volkswagen Golf Cars & Trucks

2 Answers

I need to put my cylinderhead back on a 04 chevy aveo/ need to kno the order to tighten the bolts


always start with the two center bolts and tighten bolts on a cris-cross patern, as in a X pattern working your way out to the ends of head, now note that on the torque specifications some recommend that you tighten all bolts 1/3 of the torque and repeat. others are different so get a $23.00 manual from local auto parts which is a great investment as you will use this manual again.

Jan 13, 2011 | Chevrolet Aveo Cars & Trucks

1 Answer

Cylinderhead bolts torque settings


According to my haynes manual for Landrover 200tdi, G - S reg,1989-1998 it goes as follows,
Stage 1:- Tighten all bolts to 30lb ft or 40Nm then
Stage 2:- Angle tighten a further 60 degrees then
Stage 3:- Angle tighten a further 60 degrees again.

Nov 29, 2008 | 1994 Land Rover Discovery

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...