Question about 2004 Jeep Grand Cherokee
Tips for a great answer:
Jul 11, 2014 | 2005 Jeep Liberty
Mar 21, 2014 | 2009 Jeep Liberty
Unlock all of the Jeep Grand Cherokee's doors and open the driver's side door. Keeping the door open, lock it using the manual lock on the door itself.
Put the manual key into the ignition and switch it to the "On" or "Run" position, whichever applicable, without starting the engine.
Point the remote at the receiver (located by the little bulb on the car ceiling) and hold down the "Lock" button for up to 5 seconds.
When the driver's side door unlocks, you know the remote has been programmed correctly. If you are only programming one remote, jump to the next step. If not, manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue.
Turn the key to the "Off" position and turn the ignition on immediately. This must be done within 20 seconds of programming the last remote. You're finished!
Feb 11, 2013 | 1996 Jeep Grand Cherokee
Dec 14, 2012 | 2004 Porsche Boxster S
Mar 29, 2010 | 2004 Mazda 6
Mar 22, 2010 | 1996 Jeep Grand Cherokee
Mar 02, 2010 | 2004 Jeep Grand Cherokee
Nov 19, 2009 | 2008 Jeep Commander
Jul 20, 2009 | 2004 Buick Century
May 06, 2009 | 1996 Jeep Grand Cherokee
41 people viewed this question
Usually answered in minutes!